This replacement parking light is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits LH (Driver Side)
    • Mounts in the Fender
  • Replaces dealer part number: 10301419
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Injection molded plastic
  • Direct replacement
  • Includes plastic lens and housing
  • Does not include bulbs or wiring

This parking lamp is a great replacement and has good cost savings over a corner light from the dealer.

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Parking Light (1:02)
    • Twist off the thumb screw by hand
    • Use pliers to twist off the thumbscrew, if necessary
    • Pull the parking light out by hand
    • If the headlight clip stays on the bracket, pull it off with a flat blade screwdriver
    • Twist the bulbs out of the parking light
    • Replace the bulbs, if necessary
    • If the parking light will not come out normally, continue to Step 3
  2. step : Installing the New Parking Light (2:31)
    • Twist the bulbs into the parking light
    • Push in the parking light tabs
    • Push the parking light clip in
    • Twist the thumbscrew on by hand
  3. step : Removing the Lighting Assembly (4:00)
    • This step is for if the parking light cannot be removed normally
    • Remove the two headlight assembly thumbscrews by hand
    • Use pliers to remove the thumbscrews, if necessary
    • Lift the headlight assembly up and out
    • Twist out the parking light bulbs
    • Disconnect the headlight wiring harness
    • Apply penetrating oil to the parking light thumbscrew
    • Remove the parking light thumbscrew
  4. step : Installing the New Lighting Assembly (5:20)
    • This step is for if the parking light cannot be removed normally
    • Connect the new headlight to the wiring harness
    • Attach the headlight assembly with the thumbscrews or with coarse threaded screws
    • Twist the parking light bulbs into the parking light
    • Push in the parking light tabs
    • Push the parking light clip in
    • Reattach the parking light thumbscrew

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant
  • Coarse Threaded Bolts (to replace rivets)

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Screwdrivers & Related

  • Flat Blade Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-2005 Chevy Venture Front Parking Light Driver Side
  • 1997-2004 Olds Silhouette Front Parking Light Driver Side
  • 1999-2004 Pontiac Montana Front Parking Light Driver Side
  • 2005 Pontiac Montana Base Model Front Parking Light Driver Side
  • 1997-1998 Pontiac Trans Sport Front Parking Light Driver Side

This part replaces:

  • Partslink GM2520155
  • Hollander 116-02383L
  • OE # 10301419
  • TYC 18-5030-01-1
  • DEPO 332-1561L-UF
Part #: 1ALPK00054

How-to Video:

(07:27 min)