Part Details

  • Front or Rear Location: Rear

This parking brake shoe set with hardware is just what you need to get your vehicle stopping in good order again!

Parking Brake Shoe Specifications:

  • 4 Piece Rear Parking Brake Shoe Set
  • Replaces dealer part numbers: 4654020060, 46540 20060, 4654020070, 46540 20070, 4654033010, 46540 33010, 4655020060, 46550 20060, 4655033010, 46550 33010, 4655033020, 46550 33020, 4659033010, 46590 33010, 4659033020, 46590 33020
  • Direct replacements
  • Professional Grade Shoe Set
  • Correct for models with rear disc brakes

Parking Brake Hardware Specifications:

  • Will service both LH (Driver Side) & RH (Passenger Side) REAR PARKING BRAKES
  • Kit includes:
    • 12 Springs
    • 12 Retainers
    • 2 Pins
    • 2 Adjusters
  • Direct replacements
  • Built to strict quality control standards

This rear parking brake shoe with hardware makes great replacements and have excellent value over the price of the dealer parts.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:52)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack near the pinch weld
    • Secure the vehicle on jack stands at the unibody frame rail, and place it just ahead of the lower control arm on the rear
    • Repeat the process for the other side so the vehicle is level
    • Remove the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Shoes (1:18)
    • Pull off the brake drum
    • Remove the brake shoe springs with the vise grip pliers
    • Hold the front retaining pin in place by hand
    • Twist off the front retaining spring with the vise grip pliers
    • Remove the retaining pin
    • Repeat the process for the other shoe
    • Hold the rear retaining pin in place by hand
    • Twist off the rear retaining spring with the vise grip pliers
    • Remove the rear brake shoe
    • Pry the emergency brake cable out of the front brake shoe
    • Remove the spring-loaded snap clip with a flat blade screwdriver
    • Remove the clip, spring, and brake adjustor
    • Pry off the horseshoe clip and remove the arm from the front brake shoe
  3. step : Installing the New Brake Shoes (6:51)
    • Spray the backing plate surface with brake cleaner
    • Spray the adjustor wheel and e-brake with brake cleaner
    • Insert the e-brake arm into the brake
    • Press on a new horseshoe clip
    • Clamp the horseshoe clip with pliers
    • Tighten down the brake adjustor
    • Place the adjustor into the spring
    • Insert the spring and adjustor to the shoe
    • Insert the adjustor arm into place
    • Snap the ring onto the adjuster arm
    • Reinstall the spring to the arm
    • Lift the brake shoe into place
    • Insert the e-brake spring to the brake shoe
    • Thread the retaining pin into the brake shoe
    • Twist on the retaining spring with vise grip pliers
    • Put the rear brake shoe into place
    • Thread the retaining pin into the brake shoe
    • Twist on the retaining spring with vise grip pliers
    • Push the brake shoes together by hand
    • Adjust the shoes so they touch the surface of the drum
    • Hook the springs on with the vise grip pliers
    • Slide the brake drum on
  4. step : Reattaching the Wheel (13:07)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Align the notch with the valve stem, and reinstall your hubcap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Drain Pan
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 14mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1992-2003Lexus ES300 Lexus ES300 Rear Parking Brake Shoe & Hardware Kit
2004-2006Lexus ES330 Lexus ES330 Rear Parking Brake Shoe & Hardware Kit
2007-2012Lexus ES350 Lexus ES350 Rear Parking Brake Shoe & Hardware Kit
1999-2003Lexus RX300 Lexus RX300 Rear Parking Brake Shoe & Hardware Kit
1998-2012Toyota Avalon Toyota Avalon Rear Parking Brake Shoe & Hardware Kit
1992-2011Toyota Camry Toyota Camry Rear Parking Brake Shoe & Hardware Kit Rear Disc Brakes
1990-1999Toyota Celica Toyota Celica Rear Parking Brake Shoe & Hardware Kit Rear Disc Brakes
2001-2003Toyota Highlander Toyota Highlander Rear Parking Brake Shoe & Hardware Kit
1999-2008Toyota Solara Toyota Solara Rear Parking Brake Shoe & Hardware Kit Rear Disc Brakes
Part #: 1ABDS00254


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(13:47 min)