FEL-PRO® OIL PAN GASKET: OS30689R

Specifications:

  • Fel-Pro® Brand Oil Pan Gasket
  • Made from high quality materials
  • Direct replacement
  • Built to strict quality control standards
  • Fits models with V6 2.7L Engine only

Federal-Mogul's Fel-Pro® brand is our premium sealing system and the industry's leading brand of replacement sealing products for light vehicles, light trucks, medium-duty trucks and heavy-duty applications.

Wear and Tear

This item is backed by a 60-day warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Oil Filter (0:48)
    • Have a drain pan ready
    • Remove the plug from the oil pan gasket
    • Allow the oil to drain
    • Remove the oil filter using an oil filter wrench
  2. step : Removing the Oil Pan (1:40)
    • Remove the four 15mm bolts from the oil pan bracket
    • Remove the ten 13mm bolts from the oil pan
    • Remove the long 13mm bolt from the oil pan
    • Remove the two 10mm nuts from the oil pan
    • Remove two 10mm bolts from the side of the oil pan
    • Start threading two 13mm bolts on opposite sides of the oil pan
    • Remove the 18mm bolt from the oil pan plate
    • Remove the two 10mm bolts from the oil plan plate
    • Pull down the oil pan plate
    • Remove the two 10mm nuts behind the plate
    • Pry the oil pan away from the engine with a pry bar
    • Remove the two 13mm bolts from the oil pan
  3. step : Removing the Oil Pan Gasket (5:27)
    • Pry the oil pan gasket off the engine or the oil pan with a flat blade screwdriver
    • Pull off the gasket connection
    • Pull out the gasket
  4. step : Installing the New Oil Pan Gasket (6:15)
    • Clean the oil pan gasket mounting area
    • Feed the oil pan gasket into place from the driver side
  5. step : Reinstalling the Oil Pan (6:55)
    • Push the oil pan into place
    • Start the ten 13mm bolts into the oil pan
    • Tighten the 13mm bolts to 20 foot-pounds of torque in a crossing pattern
    • Fasten the two 10mm nuts behind the oil pan plate
    • Fasten the two 10mm nuts onto the oil pan
    • Insert the two 10mm bolts into the side of the oil pan
    • Insert the long 13mm bolt into the oil pan
    • Push the oil pan plate into place
    • Insert the 18mm bolt into the oil pan plate
    • Insert the two 10mm bolts into the oil pan plate
    • Put the oil pan bracket into place
    • Insert the four 15mm bolts into the oil pan gasket
  6. step : Reinstalling the Oil Filter (9:04)
    • Clean the oil filter mounting area
    • Apply fresh oil to the oil filter gasket
    • Twist the oil filter into place
    • Tighten the oil pan drain plug
  7. step : Refilling the Oil (9:34)
    • Remove the oil cap
    • Add oil to the crank case
    • Put on the oil cap
    • Remove the dipstick and check the oil level
    • Add more oil if necessary

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Oil Filter Wrench

  • Ratchets & Related

  • Torque Wrench
  • Swivel
  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 15mm Socket
  • 13mm Socket
  • 18mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
How much does this job usually cost?
Penny A on Jul 5, 2016
BEST ANSWER: Sorry we do not have the book time for such a service

How-to Video:

(10:12 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Oil Filter Wrench

  • Ratchets & Related

  • Torque Wrench
  • Swivel
  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 15mm Socket
  • 13mm Socket
  • 18mm Socket



This part replaces:

  • FEL-PRO OS30689R

Vehicle Fit

  • 2005-2009 Chrysler 300 Oil Pan Gasket V6 2.7L FEL-PRO OS30689R
  • 1998-2004 Chrysler Concorde Oil Pan Gasket V6 2.7L FEL-PRO OS30689R
  • 2001-2009 Chrysler Sebring Oil Pan Gasket V6 2.7L FEL-PRO OS30689R
  • 2008-2009 Dodge Avenger Oil Pan Gasket V6 2.7L FEL-PRO OS30689R
  • 2006-2009 Dodge Charger Oil Pan Gasket V6 2.7L FEL-PRO OS30689R
  • 1998-2004 Dodge Intrepid Oil Pan Gasket V6 2.7L FEL-PRO OS30689R
  • 2005-2008 Dodge Magnum Oil Pan Gasket V6 2.7L FEL-PRO OS30689R
  • 2001-2006 Dodge Stratus Oil Pan Gasket V6 2.7L FEL-PRO OS30689R
Only 3 left in stock
Part #: FPEGS00034

Ships Same Day for orders placed by 4 P.M. ET

FELPRO
Brand #: OS30689R

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More