This O2 Sensor is just what you need to get your vehicle running great again!

Specifications:

  • Direct Fit
    • Correct Connector No cutting or splicing
    • Correct wire length (15.15 Inches)
  • Downstream Sensor
  • 4 wire configuration
  • Replaces dealer part numbers: 36532P2PA01, 36532 P2P A01, 36532P2RA01, 36532 P2R A01, 36532P3FA01, 36532 P3F A01, 36532P3FA11, 36532 P3F A11, 36532P72A01, 36532 P72 A01, 36532P73A01, 36532 P73 A01, 36532P75A01, 36532 P75 A01
  • Built and tested to strict quality control standards

Note: For clarification purposes:

  • Upstream location is between the catalytic converter and the engine
  • Downstream location is between the catalytic converter and the tailpipe

If you have a bad O2 sensor causing your vehicle to run poorly or fail an emission test then this is the part for you.

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Note:  You may be required to reset the vehicle’s computer after installation of this part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Identifying your Oxygen Sensors (0:57)
    • Upstream oxygen sensors are located in between the engine and the catalytic converter
    • Downstream oxygen sensors are located in the catalytic converter or farther away from the engine than the catalytic converter
    • Locate your vehicle's firing order diagram
    • The bank that contains cylinder one is bank one
    • The bank that does not contain cylinder one is bank two, even if it does not contain cylinder two

Tools needed for replacement:

    1A - No Tools Needed

  • No Tools Needed

3.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
1
defective sensor, great service
Installed sensor and code came up indicating heater element in sensor was bad, would not clear. Bought another new one locally and it was fine. Though sensor was defective 1A promptly refunded my money, great service, they made it right so they'll be keeping my business.
July 25, 2017
Purchased
11 months ago
Works good. Quality is good.
Not much to say. Car runs better and no more CEL. Pretty much does the job. Good price.
February 1, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 5 answers
Would this fit my 1999 honda civic lx manual transmission?
Roland on Aug 27, 2017
BEST ANSWER: No this is not the correct sensor for your application. The correct sensor you you is 1AEOS00017!
Is this removed with a 7/8in socket?
Jessie i on Dec 29, 2016
BEST ANSWER: yes
Would this fit an automatic 98 integra?
Tim R on Aug 3, 2017
BEST ANSWER: This part will fit the following vehicles, regardless of transmission type.

DETAILED APPLICATIONS
1998 Acura Integra GS LS RS Downstream O2 Oxygen Sensor L4 1.8L
1998 Acura Integra GS-R Downstream O2 Oxygen Sensor L4 1.8L
1998 Acura Integra Type R Downstream O2 Oxygen Sensor L4 1.8L

Vehicle Fit

  • 1996-2001 Acura Integra GS LS RS L4 1.8L Downstream O2 Oxygen Sensor
  • 1996-2001 Acura Integra GS-R L4 1.8L Downstream O2 Oxygen Sensor
  • 1997-1998 Acura Integra Type R L4 1.8L Downstream O2 Oxygen Sensor
  • 2000-2001 Acura Integra Type R L4 1.8L Downstream O2 Oxygen Sensor
  • 1997-2001 Honda CR-V Downstream O2 Oxygen Sensor
  • 1998-2000 Honda Civic EX L4 1.6L Downstream O2 Oxygen Sensor
  • 1999-2000 Honda Civic SI L4 1.6L Downstream O2 Oxygen Sensor

This part replaces:

  • OE # 36532P2PA01
  • Standard Motor Products SG614
Part #: 1AEOS00108

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(03:08 min)