Specifications:

  • Direct Fit
    • Correct Connector No cutting or splicing
    • Correct wire length (19.7 Inches)
  • Upstream or Downstream Sensor as listed per applications
  • Heated
  • 2 wire configuration
  • Flange style
    • includes gasket
  • Replaces dealer part numbers: 94854938, 8946529415, 8946519405
  • Built and tested to strict quality control standards

Note: For clarification purposes:

  • Upstream location is between the catalytic converter and the engine
  • Downstream location is between the catalytic converter and the tailpipe

If you have a bad O2 sensor causing your vehicle to run poorly or fail an emission test then this is the part for you.

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Note:  You may be required to reset the vehicle’s computer after installation of this part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Identifying your Oxygen Sensors (0:57)
    • Upstream oxygen sensors are located in between the engine and the catalytic converter
    • Downstream oxygen sensors are located in the catalytic converter or farther away from the engine than the catalytic converter
    • Locate your vehicle's firing order diagram
    • The bank that contains cylinder one is bank one
    • The bank that does not contain cylinder one is bank two, even if it does not contain cylinder two

Tools needed for replacement:

    1A - No Tools Needed

  • No Tools Needed

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
My order came in exact no problems with the installation Quality Parts pin connector was correct and was half the price of buying it from a local auto parts and will definitely order my parts needs in the future
October 9, 2017
Purchased
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1993-1995 Geo Prizm L4 1.6L (excluding California Emissions) Upstream O2 Oxygen Sensor
  • 1993-1994 Geo Prizm L4 1.8L (excluding California Emissions) Upstream O2 Oxygen Sensor
  • 1993-1995 Toyota Corolla L4 1.6L (excluding California Emissions) Upstream O2 Oxygen Sensor
  • 1993-1994 Toyota Corolla L4 1.8L (excluding California Emissions) Upstream O2 Oxygen Sensor
  • 1992-1994 Toyota Paseo L4 1.5L Upstream O2 Oxygen Sensor
  • 1995 Toyota Paseo L4 1.5L (excluding California Emissions) Upstream O2 Oxygen Sensor
  • 1991-1993 Toyota Previa L4 2.4L Downstream O2 Oxygen Sensor
  • 1994-1995 Toyota Previa L4 2.4L (excluding Supercharged Models) Downstream O2 Oxygen Sensor
  • 1991-1994 Toyota Tercel L4 1.5L Upstream O2 Oxygen Sensor

This part replaces:

  • OE # 94854938
  • OE # 8946529415
  • Standard Motor Products SG361
Part #: 1AEOS00067

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(03:08 min)