Replaces
O2 Oxygen Sensor with Install Tool - 1AEEK00689
1AEEK00689Specifications:
- Direct Fit
- Correct Connector No cutting or splicing
- Correct wire length
- Upstream or Downstream Sensor
- as listed per applications
- 4 wire configuration
- 4 terminal configuration
- Built and tested to strict quality control standards
- Includes removal and installation tool
Note: For clarification purposes:
- Upstream location is between the catalytic converter and the engine
- Downstream location is between the catalytic converter and the tailpipe
If you have a bad O2 sensor causing your vehicle to run poorly or fail an emission test then this is the part for you.
Our electrical and electronic parts are subject to strict quality control testing. Once the item has been installed or plugged in, it is no longer eligible for a refund. The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed
Lifetime Warranty
This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
-
step : Identifying your Oxygen Sensors (0:57)
- Upstream oxygen sensors are located in between the engine and the catalytic converter
- Downstream oxygen sensors are located in the catalytic converter or farther away from the engine than the catalytic converter
- Locate your vehicle's firing order diagram
- The bank that contains cylinder one is bank one
- The bank that does not contain cylinder one is bank two, even if it does not contain cylinder two
Tools needed for replacement:
- No Tools Needed
1A - No Tools Needed
- Reply
- Inaccurate
- Alex P Staff on Jul 24, 2017
- Reply
- Inaccurate
- Tim K Staff on Aug 7, 2017
Vehicle Fit
- 2001-2003 Acura CL V6 3.2L Upstream O2 Oxygen Sensor with Install Tool
- 2001-2002 Acura MDX V6 3.5L Upstream O2 Oxygen Sensor with Install Tool
- 2003-2006 Acura MDX V6 3.5L Front Bank Downstream O2 Oxygen Sensor with Install Tool
- 2005-2008 Acura RL V6 3.5L Front Bank Downstream O2 Oxygen Sensor with Install Tool
- 2000-2003 Acura TL V6 3.2L Upstream O2 Oxygen Sensor with Install Tool
- 2004-2005 Acura TL V6 3.2L Front Bank Downstream O2 Oxygen Sensor with Install Tool
- 2006 Acura TL V6 3.2L Automatic Transmission Front Bank Downstream O2 Oxygen Sensor with Install Tool
- 2003-2005 Honda Accord Sedan V6 3.0L Front Bank Downstream O2 Oxygen Sensor with Install Tool
- 2003-2005 Honda Accord Coupe V6 3.0L Automatic Transmission Front Bank Downstream O2 Oxygen Sensor with Install Tool
- 2006-2007 Honda Accord V6 3.0L Automatic Transmission Front Bank Downstream O2 Oxygen Sensor with Install Tool
- 2003 Honda Civic Hybrid L4 1.3L (Built Before VIN 3S020169) Downstream O2 Oxygen Sensor with Install Tool
- 2002-2004 Honda Odyssey V6 3.5L Upstream O2 Oxygen Sensor with Install Tool
- 2005-2007 Honda Odyssey V6 3.5L Front Bank Downstream O2 Oxygen Sensor with Install Tool
- 2008-2010 Honda Odyssey (excluding EX-L Models) V6 3.5L Front Bank Downstream O2 Oxygen Sensor with Install Tool
- 2003-2004 Honda Pilot V6 3.5L Upstream O2 Oxygen Sensor with Install Tool
- 2005-2008 Honda Pilot V6 3.5L Front Bank Downstream O2 Oxygen Sensor with Install Tool
- 2006-2008 Honda Ridgeline V6 3.5L Front Bank Downstream O2 Oxygen Sensor with Install Tool
- 2004-2007 Saturn Vue V6 3.5L Front Bank Downstream O2 Oxygen Sensor with Install Tool
This part replaces:
- Standard Motor Products SG1847
- OE # 36531P8CA11
- OE # 36532RJA004