Replaces

O2 Oxygen Sensor Walker Products 250-24105 - WKEOS00025

Walker Products Oxygen Sensor: 250-24105

Walker Products, an ISO 9001-2008 / TS16949 certified company, specializes in the manufacturing and distribution of Fuel System Components and Automotive Engine Management products. Walker is committed to meeting or exceeding OEM or equivalent standards and specifications. This effort is backed by Walker's own manufacturing, product management and engineering expertise.

Specifications:

  • Brand New Walker Oxygen Sensor
  • Direct Fit
    • Correct Connector No cutting or splicing
    • Correct wire length (15.15 Inches)
  • Downstream Sensor
  • 4 wire configuration
  • Replaces dealer part numbers: 36532P2PA01, 36532 P2P A01, 36532P2RA01, 36532P2RA01, 36532 P2R A01, 36532P3FA01, 36532 P3F A01, 36532P3FA11, 36532 P3F A11, 36532P72A01, 36532 P72 A01, 36532P73A01, 36532 P73 A01, 36532P75A01, 36532 P75 A01
  • Built and tested to strict quality control standards

Note: For clarification purposes:

  • Upstream location is between the catalytic converter and the engine
  • Downstream location is between the catalytic converter and the tailpipe

If you have a bad O2 sensor causing your vehicle to fail an emission test then this is the part for you.

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Note:  You may be required to reset the vehicle’s computer after installation of this part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Identifying your Oxygen Sensors (0:57)
    • Upstream oxygen sensors are located in between the engine and the catalytic converter
    • Downstream oxygen sensors are located in the catalytic converter or farther away from the engine than the catalytic converter
    • Locate your vehicle's firing order diagram
    • The bank that contains cylinder one is bank one
    • The bank that does not contain cylinder one is bank two, even if it does not contain cylinder two

Tools needed for replacement:

    1A - No Tools Needed

  • No Tools Needed

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1996-2000 Acura Integra L4 1.8L Downstream O2 Oxygen Sensor Walker Products 250-24105
  • 1996-2000 Acura Integra GS-R L4 1.8L Downstream O2 Oxygen Sensor Walker Products 250-24105
  • 1997-1998 Acura Integra Type R L4 1.8L Downstream O2 Oxygen Sensor Walker Products 250-24105
  • 2000-2001 Acura Integra Type R L4 1.8L Downstream O2 Oxygen Sensor Walker Products 250-24105
  • 1997-2001 Honda CR-V L4 2.0L Downstream O2 Oxygen Sensor Walker Products 250-24105
  • 1998-2000 Honda Civic EX L4 1.6L Downstream O2 Oxygen Sensor Walker Products 250-24105
  • 1999-2000 Honda Civic SI L4 1.6L Downstream O2 Oxygen Sensor Walker Products 250-24105

This part replaces:

  • Walker Products 250-24105
Part #: WKEOS00025

Out of Stock

Walker Products
Brand #: 250-24105

How-to Video:

(03:08 min)