Replaces

O2 Oxygen Sensor Walker Products 250-23109 - WKEOS00108

Walker Products Oxygen Sensor: 250-23109

Walker Products, an ISO 9001-2008 / TS16949 certified company, specializes in the manufacturing and distribution of Fuel System Components and Automotive Engine Management products. Walker is committed to meeting or exceeding OEM or equivalent standards and specifications. This effort is backed by Walker's own manufacturing, product management and engineering expertise.

Specifications:

  • Brand New Walker Oxygen Sensor
  • Direct Fit
    • Correct Connector No cutting or splicing
    • Correct wire length (36.75 Inches)
  • Upstream Sensor
    • as listed per application
  • 3 wire configuration
  • Replaces dealer part numbers: 226910W000, 22691 0W000, 226910W001, 22691 0W001, 226910W003, 22691 0W003, 226914S100, 22691 4S100, 226914S101, 22691 4S101. 226914S102, 22691 4S102, 226919S200, 22691 9S200
  • Built and tested to strict quality control standards

Note: For clarification purposes:

  • Upstream location is between the catalytic converter and the engine
  • Downstream location is between the catalytic converter and the tailpipe

If you have a bad O2 sensor causing your vehicle to run poorly or fail an emission test then this is the part for you.

Returns Note:

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.

Note:  You may be required to reset the vehicle’s computer after installation of this part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Identifying your Oxygen Sensors (0:57)
    • Upstream oxygen sensors are located in between the engine and the catalytic converter
    • Downstream oxygen sensors are located in the catalytic converter or farther away from the engine than the catalytic converter
    • Locate your vehicle's firing order diagram
    • The bank that contains cylinder one is bank one
    • The bank that does not contain cylinder one is bank two, even if it does not contain cylinder two

Tools needed for replacement:

    1A - No Tools Needed

  • No Tools Needed

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-2000 Infiniti QX4 V6 3.3L Upstream O2 Oxygen Sensor Driver Side Walker Products 250-23109
  • 1999-2003 Nissan Frontier V6 3.3L Upstream O2 Oxygen Sensor Driver Side Walker Products 250-23109
  • 1996-2000 Nissan Pathfinder V6 3.3L Upstream O2 Oxygen Sensor Driver Side Walker Products 250-23109
  • 2000-2003 Nissan Xterra V6 3.3L Upstream O2 Oxygen Sensor Driver Side Walker Products 250-23109

This part replaces:

  • Walker Products 250-23109
Part #: WKEOS00108

Out of Stock

Walker Products
Brand #: 250-23109

How-to Video:

(03:08 min)