Replaces

Nissan Wheel Bearing & Hub Assembly Pair TRQ BHA53762 - 1ASHS00879

Specifications:

  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side) Front
  • 4 Bolt Flange
  • Fits 5 Lug Wheel
  • Studs already installed
  • Direct replacements
  • Built to strict quality control standards

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.
Precision Engineered

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement

Guaranteed to fit and function correctly for your specific application.

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA54114 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (0:55)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Hub Nut (1:31)
    • Remove the 10mm ABS sensor hold down bolt
    • Wiggle the ABS sensor out of the hub
    • Bend the cotter pin up straight with pliers
    • Remove the cotter pin
    • Leverage a 16mm wrench against the caliper by placing it on a stub
    • Tighten a lug nut over the wrench
    • Break the 32mm axle nut loose
    • Remove the lug nut and 16mm wrench
    • Stick a punch in the center diver of the CV axle
    • Tap the punch with a hammer to loosen the splines
  3. step : Removing the Hub (3:13)
    • Remove 13mm bolts from the brake caliper
    • Pull the caliper aside and secure it with a bungee cord
    • Remove the rotor
    • Remove the four 17mm bolts on the backside of the spindle securing the hub
    • Pop the axle out as far as possible
    • Hammer out the hub by hitting the edges to free it from the spindle
    • Hit the CV axle out of the hub
  4. step : Installing the Hub (6:23)
    • Install the dust shield and hub into the spindle
    • Hand-tighten a few 17mm bolts to the backside
    • Insert the axle into the hub
    • Tighten the 17mm bolts with a socket and ratchet
    • Reinstall the axle nut by hand
    • Reinstall the brake rotor
    • Lower the caliper onto the rotor
    • Reinstall the 19mm bolts by hand
  5. step : Installing the Axle Nut (7:34)
    • Install a 16mm wrench to the stud
    • Leverage the wrench against the caliper
    • Tighten a lug nut to the stud
    • Tighten another lug nut to the thread closest to the wrench
    • Tighten the 32mm axle nut
    • Insert the cotter pin into place
    • Bend the cotter pin down
    • Tighten the 10mm bolt to the ABS sensor
  6. step : Reattaching the Wheel (8:25)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Center Punch
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 32mm Socket
  • 21mm Socket
  • 16mm Socket
  • 17mm Socket
  • 10mm Socket

3.3 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
1
Unsatisfied customer
Sad to say I purchased this product maybe a month ago the first couple days was ok but after that that sound came back that I need to purchase more bearings .The mechanic that fixed my car said the part must have been bad which I agree .I just purchased another part but afraid I would have that same problem very upset customer please make it right so I can continue to be a customer . Thank you
May 15, 2018
Purchased
3 months ago
Quick and Easy
Can’t beat the shopping experience and easy ordering. The free shipping arrived faster than I anticipated, which also made this a great experience. Only confusing part was the picture and part description imply this is a pair of assemblies but there is only one in the box. The price is still cheaper than any other website I checked for a single assembly, so I can’t gripe too much.
April 7, 2018
Purchased
3 months ago
Nice Fit for my Nissan Rogue
It was supper easy to install, nothing to complain about this OEM part. The delivery came in after promise but I am realistic and where I am, things are hard to arrive. Knowing these facts, I think the part arrive pretty quick for the place I live. Thanks guys for everything, you guys rock!
January 22, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
is there a difference between the front wheel drive and all wheel front drive hubs?
Micah S on Dec 26, 2017
BEST ANSWER: No theirs no difference in the hubs the difference is in the transmission it's setup for all wheel drive

Vehicle Fit

  • 2008-2013 Nissan Rogue Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2014-2015 Nissan Rogue Select Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2007-2012 Nissan Sentra Front Wheel Bearing & Hub Assembly L4 2.5L Pair TRQ

This part replaces:

  • Hollander 538-50248
  • Hollander 538-50261
  • OE # 40202JG000
  • TRQ BHA53762
Part #: 1ASHS00879

TRQ
Brand #: BHA53762

How-to Video:

(09:11 min)