Replaces

Nissan Rogue Strut & Spring Assembly Pair Monroe Quick-Strut 172608, 172609 - MNSSP01121

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Why Buy Monroe Quick-Strut Assemblies?

Monroe Quick-Strut assemblies are high quality and easy-to-install. Some of its benefits include:

  • Application specific technology
  • Restores factory ride height and feel
  • Quicker installation time than bare strut assemblies
  • Pre-assembled and no compression tool required
    • Includes new mount, bearing, coil spring, isolators, boot, and strut
  • Nitrogen gas charged

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:58)
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Strut Assembly (1:36)
    • Pry off the flexible brake hose from the clip
    • Remove the rubber retainer for the ABS sensor
    • Place locking jaw pliers on the backside of the sway bar link joint
    • Remove the nut with an 18mm socket and ratchet
    • Remove the sway bar link from the strut
    • Remove the 21mm bottom strut bolts
    • Move the spindle out of the strut
    • Remove the rubber cover on the cowl panel
    • Remove the inside 13mm bolts
    • Loosen the last 13mm down to the end of the threads
    • Support the strut without pushing up
    • Lower the strut down and out
    • Leave the bolt in the socket extension
  3. step : Installing the Strut Assembly (5:15)
    • Set the thread into the nut on the new strut on the bolt
    • Set the strut into place
    • Tighten the 13mm bolt
    • Tighten the inside 13mm bolts
    • Reinstall the steering knuckle into the bottom of the strut
    • Tighten the 21mm bolt to the bottom of the strut
    • Clip locking pliers to the back of the sway bar link
    • Tighten the 18mm nut to the sway bar link
    • Reconnect the ABS harness to the hangers
    • Slide the brake hose into place
    • Reinstall the spring clip and tap it in
  4. step : Reattaching the Wheel (8:02)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 18mm Socket
  • 13mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2008-2011Nissan Rogue Nissan Rogue Front Wheel Drive Front Strut & Spring Assembly Pair Monroe Quick-Strut 172608, 172609
2012Nissan Rogue Nissan Rogue Front Wheel Drive (Built Before 2/12 Production Date) Front Strut & Spring Assembly Pair Monroe Quick-Strut 172608, 172609
Part #: MNSSP01121

Out of Stock

Monroe Quick-Strut
Brand #: 172608, 172609

How-to Video:

(08:48 min)