Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • LH (Driver Side)
  • Mounts next to the headlight
  • Injection molded plastic
  • Bulbs and wiring not included
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved

Note: For 1999 models requiring a production date: You can find the production date of your vehicle on either the outer edge of the driver's front door or on the latch pillar that the door closes on.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Opening the Hood (0:15)
    • Pull the hood release lever
    • Locate the safety latch
    • Release the safety latch
    • Insert the prop rod
  2. step : Changing the Turn Signal Assembly (0:36)
    • Remove the 10mm bolt
    • Pull and pry straight forward to remove the assembly
    • Disconnect the electrical connection
    • Remove the bulb socket
    • Insert the socket and bulb into the new assembly
    • Lock the connector in place
    • Reconnect the electrical connector
    • Line up the tabs and push in
    • Snug up the 10mm bolt
    • Close the hood

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1999Nissan Pathfinder Nissan Pathfinder Corner Light Driver Side (Built After 12/98 Production Date)
2000-2004Nissan Pathfinder Nissan Pathfinder Corner Light Driver Side
Part #: 1ALPK00843


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:31 min)