MGSFK00025-Nissan Infiniti Outer 2 Piece Tie Rod Set

Replaces

Nissan Infiniti Outer 2 Piece Tie Rod Set MOOG MGSFK00025

MGSFK00025

Part Details

  • Set Quantity: 2 Piece
FREE SAME DAY SHIPPING
Save 33%
List: $104.95 Save: $35.00
Only 2 left in stock
Part MGSFK00025
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

MOOG
Brand #: MGSFK00025

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Set Quantity:   2 Piece

MOOG ES3438 [FRONT OUTER TIE ROD ENDS]

These Moog brand front outer tie rod ends are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) OUTER
  • Replaces one of many dealer part numbers including: 48520-0M085, D8520-15U26, 485200M085, D852015U26
  • Connect to inner tie rods
  • Direct replacements
  • Built to strict quality control standards
  • Grease-able

When installed correctly and an alignment performed, these outer tie rods could also reduce uneven tire wear.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : remove the wheel (0:50)
    • Loosen your lug nuts
    • Raise and secure your vehicle
    • Remove the lug nuts and the wheel
  2. step : Remove the tie rod (1:13)
    • Measure your tie rod to help make a preliminary alignment later.
    • Remove the cotter pin in the castle nut.
    • Remove the 19 mm castle nut.
    • Use a hammer to break the tie rod free and lift it up and out.
    • Unscrew the outer tie rod and remove it.
  3. step : Install the new outer tie rod (2:09)
    • Install the grease fitting.
    • Put the outer tie rod onto the inner tie rod.
    • Place the tie rod end into the knuckle.
    • Replace the 19 mm castle nut.
    • Measure your tie rod and make sure it is the same distance as the old one.
    • Tighten up the middle nut when it is.
    • Put your cotter pin into the castle nut.
  4. step : Put your wheel back on (3:30)
    • Thread the lug nuts.
    • Lower the vehicle
    • Tighten the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 19mm Socket
  • 21mm Socket
  • 7mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1996-2001Infiniti I30 Infiniti I30 Outer 2 Piece Tie Rod Set
2002-2004Infiniti I35 Infiniti I35 Outer 2 Piece Tie Rod Set
1989-1998Nissan 240SX Nissan 240SX Outer 2 Piece Tie Rod Set
2002-2004Nissan Altima Nissan Altima Outer 2 Piece Tie Rod Set
1995-2008Nissan Maxima Nissan Maxima Outer 2 Piece Tie Rod Set

Part Interchange

Brand Label Part Number
DIY Solutions SUS08552
DIY Solutions SUS07357

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
MOOG
Brand #: MGSFK00025
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Fixed my problem
Quality parts easy installation
September 11, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Nissan Infiniti Outer 2 Piece Tie Rod Set MOOG MGSFK00025-MGSFK00025 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.