Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the coolant temperature sensor on this 2003 Nissan Altima. The items you'll need for this repair include a 14mm wrench, Phillips screwdriver, drip pan, and a funnel with a screen or new antifreeze.
Start by removing the radiator fill cap as well as your overflow bottle cap. Under the vehicle, in this hole right here, this is your coolant drain. Using a Phillips screwdriver, twist that plug out. Make sure you have a clean drain pan to collect that coolant. Once the coolant stops pouring out, replace the plug.
Disconnect this harness by pushing in the tab and pulling it free. There's your coolant temperature sensor. Put a 14mm wrench on, counterclockwise, and it should come right out.
Take your new coolant temperature sensor and twist it back into place. Using your 14mm wrench, tighten it back up, and reconnect your harness. Fast-forward as Don replaces the engine cover and those four 5mm Allen bolts. Refill the radiator.
We're using the fluid that we drained out, we've got a funnel with a screen. Pour it back in. You can use new radiator fluid if you like. Fill the radiator directly, then fill the coolant bottle, dry the vehicle, and make sure you fill it to the proper level.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
