This replacement power window regulator with motor is just what you need to get your vehicle in good shape again!

Specifications:

  • Fits RH (Passenger Side) FRONT
  • Power operation
  • Replaces dealer part numbers: 80720-3S500, 80730-7B405, 807203S500, 807307B405
  • Includes power window motor
  • Direct replacement
  • Built to strict quality control standards

This window regulator makes a great replacement and has good cost savings over a dealer unit.

 

Please Note: This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original.  It has been subjected to extensive testing and quality control standards.  That is why we offer this regulator with our superior warranty!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push-in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this window regulator does not fit the application stated.
    •  This regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.
Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Part Details

  • Operation: Power
  • Regulator Option: with Motor

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:48)
    • Pry off the screw cover from the mirror base trim panel with a flat blade screwdriver
    • Remove the Phillips head screw from the door handle
    • Remove the Phillips screw from the door pull
    • Pull off the armrest
    • Remove the Phillips screw underneath the armrest
    • Remove the Phillips screw from the mirror base trim panel
    • Pull off the door pull panel
    • Disconnect the window switch wiring harnesses
    • Remove the Phillips screw behind the door pull
    • Pull the door panel off by hand
    • Remove the two Phillips screws from the door panel bracket
    • Carefully peel back the watershield
  2. step : Removing the Window Regulator (2:17)
    • Remove the four 10mm bolts from the window regulator plate
    • Remove the two 10mm bolts that hold the window to the regulator
    • Lift the window by hand
    • Pull the window out of the door
    • Disconnect the window motor wiring harness
    • Remove three of the four 10mm bolts from the window regulator
    • Loosen the remaining 10mm bolt from the regulator
    • Remove the three 10mm bolts from the window motor
    • Pull the regulator out of the door
  3. step : Installing the New Window Regulator (4:05)
    • Start one bolt into the new regulator
    • Slide the new regulator into the door
    • Hang the regulator in place by its bolt
    • Hang the motor by its tabs
    • Pull the wiring harness through its cavity
    • Start the three remaining 10mm regulator bolts
    • Start the three 10mm bolts into the window motor
    • Tighten the seven 10mm bolts
    • Feed the window into the door starting at the front
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
    • Connect the window motor wiring harness
    • Clip the window motor wiring harness into place
    • Put the regulator plate into place
    • Insert the four 10mm bolts into the regulator plate
  4. step : Reinstalling the Door Panel (6:04)
    • Put the watershield into place
    • Put the door panel bracket into place
    • Insert the two Phillips screws into the door panel bracket
    • Lift the door panel into place
    • Pull the wiring harnesses through their cavities
    • Push in the door panel clips
    • Insert the Phillips screw into the door handle
    • Insert the Phillips screw behind the door pull
    • Insert the Phillips screw behind the arm rest
    • Insert the Phillips screw into the mirror base trim piece
    • Push on the screw cover in the mirror base trim piece
    • Connect the window switch wiring harnesses
    • Push the door pull panel into place
    • Push the arm rest panel into place
    • Insert the Phillips screw into the door pull

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

4.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
Perfect Fit and Easy Install
Perfect fit for my 2001 Nissan Frontier front passenger window. Installation was much easier than expected. The only problem I encountered was because the window was in the full up position - made it a little tricky to reach the two bolts holding the window. Not a big deal. There is probably a way to manually lower the window, but not really needed.
March 11, 2018
Purchased
4 months ago
worked, w/ a caveat!
the video taking it out AND reinstalling it was as thorough as I'd seen. However, it would have been worth whiled to point out how important it is to assure that the glass is in the rubber valley at the front as one is putting it back in place in the door. I did not pay close attention and needless to say the glass was not in its slot and would not work. I did have to take the door all apart again to properly place the glass in the slot where it belonged. And then it worked..
August 14, 2017
Purchased
11 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-2004 Nissan Frontier Front Power Window Regulator with Motor Passenger Side
  • 2000-2004 Nissan Xterra Front Power Window Regulator with Motor Passenger Side

This part replaces:

  • OE # 807203S525
  • Hollander 125-58697R
  • Partslink NI1351121
  • Dorman 741-680
  • TYC 660079
Part #: 1AWRG00602

How-to Video:

(08:14 min)