Nissan Frontier Xterra Front Inner & Outer Tie Rod Assembly Pair Beck / Arnley 101-4740 - BASFK00008

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair


Beck/Arnley® is a leading specialty supplier of premium, quality import parts for cars, light trucks and SUVs. Unlike others, Beck/Arnley is committed to meeting their promise to provide the import parts by model and year to equal OE form, fit, and performance. All Beck/Arnley products meet or exceed OE specifications.


  • Brand New Beck / Arnley Tie Rod Assemblies
  • Comes as a PAIR
    • Fits both LH (Driver Side) RH (Passenger Side) FRONT
  • Includes both inner outer tie rods
  • Direct replacements
  • Built to strict quality control standards

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Beck/Arnley thinks of the needs of the service technician first. They evaluate OE parts for each vehicle model and year, and determine the quality standards needed for maintenance and repair work. As automotive vehicle professionals, the Beck/Arnley Product Managers seek out finished goods or assembled kits to cover the basics of the installation and make improvements when possible.

In other words, Beck/Arnley parts look, fit, and install just like the originals. They are the right replacement parts for you vehicle!

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:45)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Tie Rod (1:04)
    • Bend the cotter pins in the tie rod castle nuts with pliers
    • Push out the cotter pin with a punch and hammer
    • Remove the 22mm castle nut from the end of the outer tie rod
    • Remove the 22mm castle nut from the end of the inner tie rod
    • Tap the tie rod with a hammer to loosen it
  3. step : Preparing the New Tie Rod (3:13)
    • Unscrew the new tie rod to lengthen it
    • Screw in the new tie rod to shorten it
    • Adjust the new tie rod to the length of the old tie rod
    • Tighten the locking nuts
  4. step : Installing the New Tie Rod (3:47)
    • Put the new tie rod into place
    • Thread on the castle nuts by hand
    • Tighten both castle nuts
    • Push the cotter pins into the castle nuts
    • Bend the cotter pin into place with pliers
  5. step : Reattaching the Wheel (5:44)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack
  • Center Punch
  • Hammer

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)
  • Torque Wrench

  • Sockets - Metric

  • 22mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 22mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998-2004Nissan Frontier Nissan Frontier 4 Wheel Drive Front Inner & Outer Tie Rod Assembly Pair
2000-2004Nissan Xterra Nissan Xterra 4 Wheel Drive Front Inner & Outer Tie Rod Assembly Pair
Part #: BASFK00008

Out of Stock

Beck / Arnley
Brand #: 101-4740