Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Front Brake Rotor Specifications:
    13.78" (350mm)
    Vented
    6 Lug
  • Brake Pad Friction Material: Ceramic
  • Kit Includes:
    (1) Front Ceramic Brake Pad Set
    (1) Rear Ceramic Brake Pad Set
    (2) Front Replacement Brake Rotors
    (2) Rear Replacement Brake Rotors
  • Rear Brake Rotor Specifications:
    Vented
    12.60" (320mm)
    6 Lug
  • Brake Pad Features & Benefits:
    OE Grade Multi-Layer Shim
    Positive Mold Technology
    Environmentally Compliant
    Thermal Scorched

Brake Pad Specifications:

  • Premium Posi Ceramic Disc Brake Pads
  • 4 Piece Front Brake Pad Set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a Set of 4
    • Fits LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Fits 6 Stud Wheels
  • Front 13.78" (350mm) diameter
  • Rear 12.6" (320mm) diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:44)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:10)
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
  3. step : Removing the Brake Pads (1:27)
    • Remove the two 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads into the caliper with a flat blade screwdriver
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (2:17)
    • Remove the two 21mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread one lug nuts and strike the rotor from behind with a hammer
  5. step : Preparing the New Brake Pads and Rotors (3:04)
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
    • Clean the rotor with brake parts cleaner
  6. step : Installing the New Brake Rotor (4:12)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Slide the rotor on
    • Thread one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the two 21mm bolts by hand
    • Tighten the bolts to 100 foot-pounds of torque
  7. step : Installing the New Brake Pads (5:16)
    • Install the new brake pads into the bracket with the wear indicator on the lower side
    • Put the caliper on
    • Thread the two 14mm bolts by hand
    • Tighten bolts to 25 foot-pounds
    • Remove the placeholder lug nut
  8. step : Reattaching the Wheel (6:09)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  9. step : Testing the Brakes (6:37)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large C-Clamp
  • Wire Brush
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Cloth Rags

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 14mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Better than OEM
This kit was great! Better than the original equipment! Everything fit perfect and was easy to install thanks to the video associated with the parts. Knocked it out in 2 hours and saved a ton of money on parts and labor. Will use this site again!
September 17, 2018
Purchased
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2012-2015Nissan Armada Nissan Armada Front & Rear Premium Posi Ceramic Brake Kit
2011-2015Nissan Titan Nissan Titan Front & Rear Premium Posi Ceramic Brake Kit
Part #: 1ABFS02676


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:06 min)