Replaces

Nissan Altima Window Regulator Front Passenger Side - 1AWRG01913

This window regulator is just what you need to get your vehicle in good working form again!

Specifications:

  • Fits RH (Passenger Side) FRONT
  • Power operation
  • Replaces dealer part number: 80720-8J000, 807208J000
  • Includes the power window motor
  • Direct replacement
  • Built to strict quality control standards
  • Fits models WITHOUT Auto Up/Down feature
This window regulator is a great replacement that offers good cost savings over the dealer part!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
    •  This Regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it, you will have no issues.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:38)
    • Pry off the trim piece inside the door pull with a flat blade screwdriver
    • Remove the Phillips head screw inside the door pull
    • Pry up the window switch panel with a flat blade screwdriver
    • Disconnect the window switch wiring harnesses
    • Disconnect the mirror switch wiring harness
    • Disconnect the trunk switch wiring harness
    • Pry off the trim piece at the front top corner of the door panel with a flat blade screwdriver
    • Remove the Phillips head screw inside the door handle
    • Remove the two Phillips head screw inside the door pull
    • Disconnect the courtesy light
    • Lift the door panel up and off
  2. step : Removing the Inner Door Panel (2:02)
    • Disconnect the cables from the door handle
    • Disconnect the door lock wiring harness
    • Disconnect the harnesses from the inner door panel
    • Remove sixteen 10mm bolts on the black inner door panel
    • Remove the two 10mm bolts from the silver discs on the black inner door panel
    • Hold on to the window when removing the last 10mm bolt
    • Lower the window down into the door
    • Pull the harness out of the door panel and push the rubber harness through the inner door panel
  3. step : Removing the Window Regulator (4:08)
    • Remove the two 10mm bolts that hold the window to the regulator
    • Raise the window by hand and pull it up and out
    • Pull the window regulator out through the door
  4. step : Installing the New Window Regulator (4:55)
    • Attach the regulator to the inner door panel
    • Attach the 10mm screws to the regulator onto the inner door panel
    • Attach the two 10mm bolts from the silver discs onto the inner door panel
    • Feed the panel into place
    • Tighten the rest of the 10mm screws to the inner door panel
    • Remove the caps on the inner door panel with a razor blade
    • Reconnect the window harnesses to the switch panel
    • Adjust the regulator until the window clips are visible
    • Lower the window, place the front into the track, then the rear
    • Slide the window onto the clips in the regulator
    • Attach the 10mm bolts to the regulator
    • Replace the covers on the inner door panel
    • Reconnect the harness clips into the door panel
  5. step : Reinstalling the Door Panel (8:16)
    • Connect the door lock wiring harness
    • Re-clip the lock rod and attach the lock rod to the door handle
    • Push the harnesses through the door panel
    • Align the door panel and push it into place
    • Reattach the courtesy light
    • Tighten the Phillips screws in the pull handle
    • Tighten the Phillips head screw inside the door handle
    • Reconnect the switch panel
    • Push the switch panel down into place
    • Tighten the Phillips screw in the switch panel
    • Replace the trim piece at the front top corner of the door panel

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
I need to know if this is a 2 pin connection adapter ?
Gerar on Jun 12, 2016
BEST ANSWER: To be honest I didn't pay attention to the pins on the adapter but it was a direct replacement to the factory regulator. Plug and play replacement.

How-to Video:

(10:08 min)

Tools List:

    General Tools

  • Razor Blade / Gasket Scraper

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench



This part replaces:

  • Hollander 125-58912R, 617-58646R
  • OE # 807208J000
  • Dorman 741-907

Vehicle Fit

  • 2002 Nissan Altima Power Window Regulator with Motor Front Passenger Side (Built After 9/01 Production Date) for Models without Auto Down Feature
  • 2003-2006 Nissan Altima Power Window Regulator with Motor Front Passenger Side for Models without Auto Down Feature
Part #: 1AWRG01913

Out of Stock

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More