Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
TRQ oxygen sensors are manufactured to precise specifications using premium raw materials to optimize your vehicle’s emission system. Each sensor is isostatically-pressed for improved strength and durability, and plasma-sprayed to improve sensitivity and prolong the service life of the sensors. Oxygen sensors wear out over time and should be replaced every 60,000 miles to prevent poor engine performance. TRQ recommends replacing the oxygen sensors in sets to optimize fuel economy and reduce overall emissions. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
What is Upstream vs. Downstream?
Install Tip: You may be required to reset the vehicle computer after installation of this part.
Highest Quality MaterialsMade from highest quality materials that meet or exceed OEM standards
Quality Tested - built to a strict level of product standards.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
What's up, guys? I'm Andy from 1A Auto. In this video, I'm going to show you how to replace the downstream O2 sensor on this 2010 Nissan Altima. If you need parts for your vehicle, click the link in the description and head over to 1aauto.com.
Now, the 02 sensor is right here. I'm just going to disconnect this from the electrical connector. I'm going to take some needle nose pliers, just get underneath here, squeeze this, and then slide this out. Now, there's a little button to release the connector. Push down on the button. Just taking a screwdriver, I'm going to get underneath the lock because there's a lot of dirt in there and disconnect the O2 sensor. You can blow it out with some compressed air. Alright. That's good.
You can use an O2 sensor socket or an O2 sensor wrench, or you can just use a 7/8 inch wrench, which is what I'm going to do. Just going to use the box end of the wrench and loosen it up, if it comes loose. Sometimes it needs to stick on there pretty good. It's on real tight. Just loosen this up. If you have to, you can put a pipe on the end of the wrench. Get that loose, take that out, and there it is.
Just take this O2 sensor. Now this happens to be the O2 sensor that is after the catalytic converter, so it doesn't monitor the engine. It monitors the catalytic converter. So slide this in position here. Now, we're just reusing this O2 sensor, but if you're replacing it, the procedure is going to be the same. Just going to take my 7/8 inch wrench, tighten this up. Alright. Snug that up, not too tight. You really don't have to tighten the O2 sensors too much. Slide the wrench off. And I'm going to connect the connector right here. Just line it up. It only goes on one way. Lock it in place. And there's a retainer that holds the connector onto this bracket. Just line that up, and then this wire is going to through this little retainer right here. You can use a little pick or a screwdriver to try to get this to line up, just like that.
Thanks for watching. Visit 1aauto.com, your place for DIY auto repairs, for great parts, great service, and more content.
Tools used
Tools used
Tools used
