This replacement sway bar link is just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item the end links are. Over time the ball & socket joints can wear causing loose connections, or even come apart and fall off.

Specifications:

  • Fits the LH (Driver Side) FRONT
  • Replaces dealer part number: 54668-8J000, 546688J000
  • Direct replacement
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. This link makes a great replacement and offers good cost savings over the dealer part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (0:58)
    • Loosen the lug nuts with your 19 mm socket and breaker bar
    • Raise and secure the vehicle
    • Remove the lug nuts and set the wheel aside.
  2. step : Remove the sway bar links (1:17)
    • Hit the bolts with penetrating oil.
    • Use a 17 mm socket and 19 mm wrench to remove the bolt on each end of the sway bar link.
  3. step : install the new sway bar link (2:41)
    • Feed your sway bar link into place.
    • Thread the nuts and bushings.
    • Tighten up both bolts with your 17 mm socket and 19 mm wrench.
  4. step : put your wheel back on (3:15)
    • Hand tighten the lug nuts
    • Lower the vehicle
    • Torque your lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 19mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2006 Nissan Altima Front Sway Bar Link Driver Side
  • 2004-2008 Nissan Maxima Front Sway Bar Link Driver Side

This part replaces:

  • OE # 546688J000
  • Moog K90352
Part #: 1ASSL00123

How-to Video:

(03:52 min)