Specifications:

  • Brand New Suspension Kit
  • Comes as a Set of 6
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Lower Control Arms with Ball Joints
  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Rear Sway Bar Links
  • Quantity: 6 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (0:53)
    • Loosen the lug nuts with your 19 mm socket and breaker bar
    • Raise and secure the vehicle
    • Remove the lug nuts and set the wheel aside.
  2. step : Remove control arm (1:13)
    • Remove the cotter pin in the control arm joint.
    • Hit the nut with penetrating oil.
    • Use a 22 mm wrench to remove the nut.
    • Remove the first of two 19 mm bolts on the other end of the control arm.
    • In order to get the second 19 mm bolt, you have to remove the engine bracket.
    • Jack up the suspension to relieve tension from the control arm.
    • Unbolt the two 12 mm bolts and the 19 mm nut to remove this bracket.
    • Now remove the final bolt with your 19 mm socket and ratchet.
  3. step : Install the new control arm (3:30)
    • Remove the castle nut and remove the plastic cover from the bushing.
    • Install the control arm, gently using a hammer to convince the control arm to line up if necessary.
    • Thread the bolts through and tighten them up.
    • Install the engine bracket.
    • Torque the 19 mm bolts in the control arm to 85 ft lbs
    • Replace castle nut and thread the cotter pin through and secure it.
  4. step : Replace the wheel (5:40)
    • Put the wheel back on.
    • Thread on the lug nuts.
    • Lower the vehicle
    • Torque the lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 12mm Socket
  • 19mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 22mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2006 Nissan Altima 6 Piece Set Suspension Kit
  • 2004-2008 Nissan Maxima 6 Piece Set Suspension Kit

This part replaces:

  • Moog K620167
  • Moog K620166
  • Dorman 520-511
  • Dorman 520-512
  • Hollander 512-58634L, 512-58823L
  • Hollander 512-58633R, 512-58822R
  • OE # 545017Y00A, 54501-8J000
  • OE # 54500-8J000, 545007Y00A, 00
  • OE # 546688J000
  • OE # 546188J000
  • OE # 562618J000
  • Moog K90352
  • Moog K90353
  • Moog K90684
Part #: 1ASFK05062

How-to Video:

(06:14 min)