Replaces

Nissan Altima Maxima Steering & Suspension Kit - 1ASFK03416

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 6 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Lower Control Arms with Ball Joints
  • Kit Includes: (2) Front Sway Bar Links
  • Quantity: 6 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Remove the wheel (0:58)
    • Loosen the lug nuts with your 19 mm socket and breaker bar
    • Raise and secure the vehicle
    • Remove the lug nuts and set the wheel aside.
  2. step : Remove the sway bar links (1:17)
    • Hit the bolts with penetrating oil.
    • Use a 17 mm socket and 19 mm wrench to remove the bolt on each end of the sway bar link.
  3. step : install the new sway bar link (2:41)
    • Feed your sway bar link into place.
    • Thread the nuts and bushings.
    • Tighten up both bolts with your 17 mm socket and 19 mm wrench.
  4. step : put your wheel back on (3:15)
    • Hand tighten the lug nuts
    • Lower the vehicle
    • Torque your lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 19mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Good quality
I recommend this company. They are by far the best price and quality around. Shipping was super fast too. I got my order the following day!
January 26, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
does this fit the SE or SL model?
YFfinest on May 1, 2016
BEST ANSWER: fits both

Vehicle Fit

  • 2002-2006 Nissan Altima 6 Piece Set Steering & Suspension Kit
  • 2004-2008 Nissan Maxima 6 Piece Set Steering & Suspension Kit

This part replaces:

  • Dorman 520-511
  • Dorman 520-512
  • Hollander 512-58634L, 512-58823L
  • Hollander 512-58633R, 512-58822R
  • OE # 485200M025, 485200M085
  • OE # 545017Y00A, 54501-8J000
  • OE # 54500-8J000, 545007Y00A
  • OE # 546688J000
  • OE # 546188J000
  • Moog K620167
  • Moog K620166
  • Moog K90352
  • Moog K90353
  • Moog ES3438
  • OE # 54500-8J000, 545007Y00A, 00
Part #: 1ASFK03416

How-to Video:

(03:52 min)