Replaces

Nissan Altima Maxima Steering & Suspension Kit - 1ASFK00613

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as an 8 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (0:53)
    • Loosen the lug nuts with your 19 mm socket and breaker bar
    • Raise and secure the vehicle
    • Remove the lug nuts and set the wheel aside.
  2. step : Remove control arm (1:13)
    • Remove the cotter pin in the control arm joint.
    • Hit the nut with penetrating oil.
    • Use a 22 mm wrench to remove the nut.
    • Remove the first of two 19 mm bolts on the other end of the control arm.
    • In order to get the second 19 mm bolt, you have to remove the engine bracket.
    • Jack up the suspension to relieve tension from the control arm.
    • Unbolt the two 12 mm bolts and the 19 mm nut to remove this bracket.
    • Now remove the final bolt with your 19 mm socket and ratchet.
  3. step : Install the new control arm (3:30)
    • Remove the castle nut and remove the plastic cover from the bushing.
    • Install the control arm, gently using a hammer to convince the control arm to line up if necessary.
    • Thread the bolts through and tighten them up.
    • Install the engine bracket.
    • Torque the 19 mm bolts in the control arm to 85 ft lbs
    • Replace castle nut and thread the cotter pin through and secure it.
  4. step : Replace the wheel (5:40)
    • Put the wheel back on.
    • Thread on the lug nuts.
    • Lower the vehicle
    • Torque the lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 12mm Socket
  • 19mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 22mm Wrench

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Great parts, exact fit
The exact parts I ordered arrived within a few days with the free shipping and the online videos were very helpful. I managed to install all parts easily (once the old rusty ones were off). I will be ordering more parts from 1A Auto in the future.
March 23, 2017
Purchased
1 year ago
Excellent Pricing & Service!
I am very pleased with the quality, warranty, selection and above all your customer service who actually took the time to talk with me and answer all questions! I am presently recommending you and your company for this reason above all. Keep up the great work! Sincerely, Robert 440-289-7560
July 4, 2017
Purchased
11 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
What brand are all the components to this kit?
Rock1 on Aug 31, 2015
BEST ANSWER: Im not sure there is a brand. Everything fit well. The car is still running on the parts after all was done and alignment. I am satisfied.

Vehicle Fit

  • 2002-2006 Nissan Altima 8 Piece Set Steering & Suspension Kit
  • 2004-2008 Nissan Maxima 8 Piece Set Steering & Suspension Kit

This part replaces:

  • Dorman 520-511
  • Dorman 520-512
  • Hollander 512-58634L, 512-58823L
  • Hollander 512-58633R, 512-58822R
  • OE # 485200M025, 485200M085
  • OE # 545017Y00A, 54501-8J000
  • OE # 54500-8J000, 545007Y00A
  • OE # 546688J000
  • OE # 546188J000
  • OE # 485217Y000, 485218J000
  • Moog K620167
  • Moog K620166
  • Moog K90352
  • Moog K90353
  • Moog ES3438
  • Moog EV427
  • OE # 54500-8J000, 545007Y00A, 00
Part #: 1ASFK00613


How-to Video:

(06:14 min)