RABCR00050-Nissan Altima Maxima Rear Passenger Side Brake Caliper
false

Replaces

Nissan Altima Maxima Rear Passenger Side Brake Caliper Raybestos Element 3 FRC12046N


07-17 Nissan Altima; 06 (frm 8/06)-08 Maxima Rear Disc Brake Caliper w/Bracket RR (Raybestos)
$ 89.95
$129.95
31% OFF
$129.95
31% OFF
FREE SAME DAY SHIPPING
Raybestos Element 3
FRC12046N
In Stock
Part RABCR00050
Only 1 left in stock

Orders must be placed by 2pm ET
Part RABCR00050
In Stock
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Frequently bought together

Description

Vehicle Fit

Warranty & Shipping
How-To & Tools

Part Details

  • Includes:
      Bracket
      Hardware

Raybestos Element 3 New Brake Caliper

  • Designed to match OE specifications
  • Made with 100 percent newly manufactured materials, offering unparalleled style and performance
  • Zinc plated or aluminum, delivering superior corrosion resistance in the harshest of elements
  • Rigorously tested to ensure a safe, reliable performance after thousands of miles
  • Friction-ready, giving you the freedom to customize the brake pads for each application
100% New, No Rebuilt Components

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories.  Shipping is not available to Canada.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses.  Final shipping costs are available at checkout.

How to Replace Rear Caliper 06-12 Nissan Altima

Created on: 2019-05-07

Check out this tutorial video from 1A Auto to learn how to replace stuck, rusty, or leaky brake calipers on your 06-12 Nissan Altima.

  1. step 1 : Removing the Wheel
    • Partially raise the vehicle off the ground
    • Loosen the lug nuts
    • Raise and support the vehicle on jack stands
    • Remove the lug nuts
    • Hammer the tire from the back side if the wheel is stuck
    • Remove the last lug nut and the wheel
    • Remove the hub cap
  2. step 2 : Removing the Brake Caliper
    • Place a drain bucket below work area
    • Loosen the brake bleeder screw
    • Verify fluid comes out
    • Pry between the caliper and a brake pad to push back the piston and loosen the caliper
    • Close the bleeder screw
    • Loosen the two 14 mm caliper slider bolts
    • Remove the two 19 mm caliper bracket bolts
    • Remove and support or rest the caliper so that there is no tension on the brake hose
    • Pinch off the brake hose with hose pinch off pliers
    • Remove the brake hose bolt
  3. step 3 : Preparing the New Caliper at the Bench
    • Remove the caliper slider bolts, indicating which hole each bolt came from
    • Remove the caliper tins
    • Apply brake grease where the caliper tins rest against the bracket
    • Replace the caliper tins
    • Apply brake grease to the caliper slider bolts
    • Apply brake grease to the brake caliper only in locations where the brake pads ride
    • Seat the pads in place, making note of which pad is intended to sit in which position
    • Replace the caliper slider bolts through the caliper into the bracket
    • Tighten the caliper slider bolts by hand
  4. step 4 : Installing the New Caliper
    • Visually inspect the brake line bolt and remove all copper washers
    • Place one new copper washer on the brake line bolt
    • Make sure the brake line fitting is clean and free of debris or stuck on old washers
    • Set the brake line bolt in the fitting
    • Install the brake caliper by fitting the rotor in between the pads and lining up the bracket with the knuckle
    • Replace the 19 mm caliper bracket bolts by hand, and then tighten
    • Install a second copper washer between the brake line fitting and the caliper
    • Install the brake line fitting so that the ear of the fitting fits in the alignment hole in the caliper
    • Replace the 12 brake line bolt by hand and then tighten it
  5. step 5 : Bleeding the Brake Caliper
    • Pump the brake pedal slowly several times to activate the brake caliper
    • Open the 8 mm bleeder screw until there is a steady trickle of brake fluid
    • Close the bleeder screw
    • Replace the bleeder cap
    • Check brake fluid level at the reservoir inside the engine compartment and fill as needed with the fluid type listed on the reservoir cap
  6. step 6 : Replacing the Wheel
    • Slide the wheel onto the wheel studs
    • Replace the wheel cover, if equipped
    • Replace the 5 lug nuts and tighten them by hand with a 21 mm socket
    • Partially lower the vehicle
    • Torque the lug nuts in a star pattern to 83 ft-lb
    • Lower the vehicle completely

Tools needed for replacement

  • General Tools

    Jack Stands

    Bucket

    Floor Jack

  • Materials, Fluids, and Supplies

    Brake Grease

    Safety Glasses

    Gloves

  • Pliers, Cutters & misc Wrenches

    Hose Pinch-Off Pliers

  • Ratchets & Related

    Socket Extensions

    Torque Wrench

    Ratchet

    1/2 Inch Breaker Bar

  • Screwdrivers & Related

    Pry Bar

  • Sockets - Metric

    12mm Socket

    21mm Socket

  • Wrenches - Metric

    14mm Wrench

    8mm Wrench

    19mm Wrench

Installation Video
Watch video

Fits these Makes

Year Make Model Description
2007-2012Nissan Altima Nissan Altima Rear Passenger Side Brake Caliper
2007-2008Nissan Maxima Nissan Maxima Rear Passenger Side Brake Caliper

Part Interchange

Brand Label Part Number
Cardone Reman 19-B2781
DIY Solutions BFS02399

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Raybestos Element 3
FRC12046N
In Stock
Part RABCR00050
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Nissan Altima Maxima Rear Passenger Side Brake Caliper Raybestos Element 3 FRC12046N-RABCR00050 does not fit your:



Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.