Nissan Altima Maxima Inner & Outer Tie Rod 4 Piece Set - 1ASFK01835

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set

These Tie Rod Ends are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.


  • Comes as a SET of 4
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT INNER and OUTER
  • Replaces dealer part numbers: 485200M085, 485217Y000, 485218J000, 485200-M085, 48521-7Y000, 48521-8J000
  • Direct replacements
  • Built to strict quality control standards

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Our steering and suspension components come pre-greased,  sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : remove the wheel (0:50)
    • Loosen your lug nuts
    • Raise and secure your vehicle
    • Remove the lug nuts and the wheel
  2. step : Remove the tie rod (1:13)
    • Measure your tie rod to help make a preliminary alignment later.
    • Remove the cotter pin in the castle nut.
    • Remove the 19 mm castle nut.
    • Use a hammer to break the tie rod free and lift it up and out.
    • Unscrew the outer tie rod and remove it.
  3. step : Install the new outer tie rod (2:09)
    • Install the grease fitting.
    • Put the outer tie rod onto the inner tie rod.
    • Place the tie rod end into the knuckle.
    • Replace the 19 mm castle nut.
    • Measure your tie rod and make sure it is the same distance as the old one.
    • Tighten up the middle nut when it is.
    • Put your cotter pin into the castle nut.
  4. step : Put your wheel back on (3:30)
    • Thread the lug nuts.
    • Lower the vehicle
    • Tighten the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 19mm Socket
  • 21mm Socket
  • 7mm Socket

4.75/ 5.0
8 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Nissan Altima tie rods
Just as described ;perfect fit. Recommended seller.
March 3, 2017
Awesome product top quality
I put these in my 240sx s13 and they are awesome for my application work amazingly!
September 13, 2017
I love 1 A Auto. Their prices are much lower than the competition. I wish they had a store close by.
October 19, 2017
Professional Care!
1A Auto company works hard for the customer. I think their customer service and the tutorial videos are excellent source from start point on any mechanical job. Their price are competitive and you get it earlier most of the time. I get the parts exactly the way I ordered. Two thumbs up!
September 27, 2018
Great buy
The parts fit perfectly. No issues installing them
December 9, 2018
I purchase as much products from 1A Auto as I can. Good products great pricing , easy website , easy ordering and great customer service. The installation videos are great as well
January 8, 2019
Great product helped with my struts.
April 11, 2019
The product was on time and of high quality
July 15, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
are the left and right inner tie rods different or same length for maxima 2003?
Kevin D May 3, 2016
same for each side
Brian F May 3, 2016
Yes they are the same length for the inner
Naasirdeen S May 3, 2016
They are the same..
Pablo B April 2, 2018
What is the length of the tie rods?
Jabari M May 18, 2018
I dont have the exact measurements. Our parts are designed to be exact replacements for what came with the vehicle, so as long as your year, make, and model match up with our listing, these will definitely fit and function just like the original. Please let us know if you have any other questions.
Peter L May 18, 2018
Year Make Model Description
2002-2006Nissan Altima Nissan Altima Inner & Outer Tie Rod 4 Piece Set
2003-2008Nissan Maxima Nissan Maxima Inner & Outer Tie Rod 4 Piece Set
Part 1ASFK01835
In Stock

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.