Replaces

Nissan 240SX Altima Air Flow Meter with Housing - 1AEAF00044

This mass air flow sensor is just what you need to get your vehicle in good working order again!

Specifications:

  • Brand New
    • Not remanufactured
    • No core charge
  • Fits in between air cleaner and air intake hose
  • Is 100% computer tested prior to leaving manufacturer

Installation Notes:

1. Make sure the air filter is in good condition and replace if necessary.
2. Clean out and inspect the intake hose when replacing this part. Moving the intake hose during replacement can loosen dirt which can then damage the new sensor.

This item is an electrical part. These units are tested prior to shipment.

Our electrical and electronic parts are subject to strict quality control testing .  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Note:  You may be required to reset the vehicle’s computer after installation of this part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the mass air flow (MAF) sensor (0:35)
    • Pop the hood.
    • Disconnect the wiring harness.
    • Unclip the harness from its bracket.
    • Use your screwdriver to loosen up the hose clamp
    • Unclip the air box and pull the top off.
    • Remove the four 10 mm bolts with your socket and ratchet.
    • Remove the sensor from the bracket.
  2. step : install the mass air flow sensor (1:55)
    • Mount the MAF sensor into its bracket and bolt it to the air box
    • Clip the air box back on and clamp the hose down to the intake.
    • Connect the wiring harness and clip the harness back down.
    • Close the hood.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Customer satisfaction
Researched the internet for an equivalent replacement and the web page indicated guaranteed match for the OE part number special. Received the part in an efficient time and after installation we have not experienced any issues. Would recommend the part and company for future needs.
October 15, 2017
Purchased
4 months ago
works perfectly
I can't speak for longevity yet but but meter looked exactly like the original, all connections matched up well and car runs fine.
August 20, 2017
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(03:28 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket



This part replaces:

  • OE # 226809E000, 226809E005
  • OE # 2268070F00
  • Hollander 336-60509
  • Hollander 336-60130

Vehicle Fit

  • 1994 Nissan 240SX Air Flow Meter with Housing (Built After 1/94 Production Date)
  • 1995-1998 Nissan 240SX Air Flow Meter with Housing
  • 1998-2001 Nissan Altima Air Flow Meter with Housing
Part #: 1AEAF00044

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More