Specifications:

  • LH (Driver side)
  • Power operation
  • Heated
  • Folding - Manual operation
  • Black Textured Housing with Black Cap
  • Replaces dealer part number: 6W7Z-17683-BA, 6W7Z17683BA
  • Injection molded black plastic housing
  • Direct replacement
  • Built to strict quality control standards

Special Note:

  • Unless otherwise noted, replacement mirrors will only work properly on vehicles with the exact same options. If your vehicle does not have the options listed in specifications, the mirror(s) may not function properly.

Part Details

  • Mirror Heating Type: Heated
  • Mirror Operation: Power

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:39)
    • Pry up the window switch panel with a flat blade screwdriver
    • Disconnect the window switch wiring harnesses
    • Pry off the trim piece inside the door handle with a flat blade screwdriver
    • Remove the T30 Torx bolt inside the door handle
    • Remove the three 7mm bolts around the edge of the door panel
    • Pry off the mirror base trim piece by hand
    • Remove the 7mm bolt behind the switch panel
    • Lift the door panel up and off
    • Remove three Phillips head screws from the speaker
    • Pull off the speaker
    • Disconnect the speaker wiring harness
    • Pull back the water shield
  2. step : Removing the Mirror (2:24)
    • Peel back the mirror base panel
    • Pull the panel off its clip by hand or with pliers
    • Cut access points to the mirror studs with a razor blade
    • Remove the three 7/16 inch nuts from the mirror
    • Unclip the mirror wiring harness from the door
    • Disconnect the wiring harness
    • Pull the mirror up and out
  3. step : Installing the New Mirror (3:28)
    • Thread the mirror wiring harness into the door
    • Put the mirror into place using the studs
    • Fasten the three 7/16 nuts onto the stud
    • Connect the mirror wiring harness
    • Clip the wiring harness to the door
  4. step : Reinstalling the Door Panel (4:08)
    • Put the water shield into place
    • Connect the speaker wiring harness
    • Put the speaker into place
    • Insert the three Phillips screws into the speaker
    • Clip the mirror base panel into place
    • Lift the door panel into place
    • Insert the three 7mm bolts around the edge of the door panel
    • Insert the 7mm bolt behind the switch panel
    • Insert the T30 bolt inside the door handle
    • Push on the trim piece inside the door handle
    • Push on the mirror base trim piece
    • Connect the window switch wiring harnesses
    • Push the window switch panel into place starting at the front

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 7mm Socket

  • Sockets - SAE

  • 7/16 Inch Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2002-2011Ford Crown Victoria Ford Crown Victoria Power Heated Mirror Driver Side
2002-2010Mercury Grand Marquis Mercury Grand Marquis Power Heated Mirror Driver Side
2003-2004Mercury Marauder Mercury Marauder Power Heated Mirror Driver Side

This part replaces:

  • Partslink FO1320214
  • OE # 6W7Z 17683 AA
Only 2 left in stock
Part #: 1AMRE00624


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:16 min)