This replacement Ford/Mercury mirror is just what you need to get your Ford/Mercury SUV in good looking form again!

Specifications:

  • LH (Driver Side)
  • Power mirror
  • Includes puddle light
  • Sail mount design - Mounts in the corner of the door
  • Injection molded black plastic housing
    • Can be painted by the buyer to any color desired or installed as is
  • Direct replacement mirror
  • Built to strict quality control standards
  • Non-Heated

This Ford/Mercury mirror makes a great replacement and has substantial cost savings over a dealer unit.

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed in specifications, the mirror may not function properly.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:55)
    • Pry out the door handle bezel
    • Remove the two Phillips screws under the door pull.
    • Pry out the upper switch.
    • Disconnect the harness.
    • Using a putty knife pry out the clips around the door panel.
    • Lift the door panel up and off.
    • Press down the teeth and slide the switch panel through.
  2. step : Removing the Side Mirror (3:54)
    • Remove the speaker.
    • Unplug the mirror harness.
    • Remove the three 11mm nuts that secure the mirror.
    • Pull the mirror out and off.
  3. step : Replacing the Side Mirror (6:11)
    • Feed the harness down though the door.
    • Replace the three 11mm bolts.
    • Reconnect the harness.
    • Replace the speaker.
  4. step : Replacing the Door Panel (8:33)
    • Press the switch panel back into the door panel.
    • Put the panel into place and push the clips back into the door.
    • Reconnect the upper switch and replace it.
    • Replace the two Phillips screws.
    • Replace the door handle bezel

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 11mm Socket

3.3 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
1
1
0
1AMRE00395-Mirror Driver Side
Installation was straight-forward and according to your instructions. My complaint is that the mirror (glass) is not solid like the OEM mirror. While driving, there is noticeable jittering in the reflected image. It is still usable but I find it annoying. And yes, the attachment bolts are all tight. Still, I like your company and your service.
June 30, 2017
Purchased
1 year ago
awsome
hello everyone ,,,i installed the mirror my self and it been working great,,a1 auto rock,,,,
June 24, 2017
Purchased
1 year ago
Reasonable fit for the cost - but mirror itself vibrates
The external construction of the mirror was acceptable. However, the gasket on the new mirror was too thick. Pulled the gasket from the old mirror and used it on the new mirror, in place of the gasket that it came with to get a tighter fit. While the mirror itself is functional, once you get above about 30 mph, the mirror itself, not the housing, vibrates. The internal connection of the aftermarket housing is different from the OEM mirror, which appears to be the cause for the vibration.
February 19, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-2000 Ford Explorer Power Puddle Light Mirror Driver Side
  • 2001 Ford Explorer 4 Door Power Puddle Light Mirror Driver Side
  • 1998-2001 Mercury Mountaineer Power Puddle Light Mirror Driver Side

This part replaces:

  • Partslink FO1320157
  • Hollander 128-00519L
  • OE # F87Z 17683 AAB
  • TYC 3020632
  • DEPO 330-5407L3EF2
Part #: 1AMRE00395

How-to Video:

(09:07 min)