Specifications:

  • Fits LH (Driver Side)
  • Power operation
  • Dual Heated Glass
  • Dual LED Turn Signal
  • Puddle Light
  • Folding - Power operation
  • Black Textured & Chrome Finish Caps included
  • Built to strict quality control standards
  • Direct fit replacement
  • Without Memory Function
  • Without Auto Dimming Feature

PLEASE NOTE:  This mirror is not a stock option and will only replace units that have been upgraded to an aftermarket towing style mirror.

Trusted Quality

  • Trail Ridge Truck Accessories are developed and built with a promise to provide high quality, durable parts for your truck and back them with the best warranty in the automotive industry. They are manufactured from the highest quality materials and are constructed to meet or exceed OEM standards. Every Trail Ridge truck part is rigorously tested to ensure superior fit, function, and durability. Quality, trusted value, and hassle-free installation are all backed by our 100% satisfaction guarantee.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Pin Insertion Instruction
  1. step : Removing the Door Panel (0:56)
    • Pry off the trim piece inside the door handle with a flat blade screwdriver
    • Pry up the window switch panel with a flat blade screwdriver
    • Disconnect the door lock wiring harness
    • Disconnect the window switch wiring harness
    • Pry off the speaker cover with a flat blade screwdriver
    • Remove the two 10mm bolts inside the door handle
    • Remove the 10mm bolt behind the screw panel
    • Remove the 6mm bolts from the speaker
    • Remove the two 10mm bolts at the bottom of the door panel
    • Pry off the speaker
    • Disconnect the speaker wiring lead
    • Remove the gasket from the speaker area
    • Remove the two speaker screw grommets with pliers
    • Lift the door panel up and off
    • Disconnect the latch cables from the door handle
  2. step : Removing the Side View Mirror (2:42)
    • Disconnect the side view mirror wiring harness
    • Remove the three 10mm nuts from the mirror
    • Remove the side view mirror
  3. step : Installing the Tow Mirrors (3:06)
    • Tighten the 10mm nuts on the tow mirrors by hand
    • Connect the mirror wiring harness
  4. step : Removing the Fuse Panel Cover (3:34)
    • Pull up on the side carpet trim
    • Pull the weather strip off of the door
    • Pull back on the kick panel near the door jamb
    • Pull off the side dash panel
    • Remove the fuse panel cover
  5. step : Connecting the Switch Wiring Harnesses (4:31)
    • Push in on the door connector tab near the door jamb and pull the grey connector down
    • Pull the door in and out to release the harness connection
    • Remove the rubber boot from the door
    • Poke a hole in the rubber boot with a flat blade screwdriver
    • Insert the signal wires into the hole and through the rubber boot
    • Carefully peel back the water shield
    • Pull the signal wires through the door
    • Connect the signal wires to the tow mirror
    • Repeat the process for the power-fold wiring harness
    • Wire-tie the new harnesses to the existing harness
    • Insert the rubber boot into the door
    • Plug in the door harness to the body
    • Repeat the process for the other side
  6. step : Wiring the Connectors (8:08)
    • Place electrical tape on the pinch weld
    • Run the wiring through the pinch weld
    • Press the weather strip in place
    • On the driver side bring the wiring up into the dash
    • Pull off the lower panel on the center console on both sides
    • Run the power fold wiring from the passenger side to the driver side
    • Insert the marker wiring and parking light wiring from the driver side to the passenger side
  7. step : Installing the Switch (10:20)
    • Cut out a template that's the same size as the switch
    • Draw a line around the template on the lower dash panel
    • Drill a hole on each side within the line
    • Shape the hole with a Dremel tool
    • Feed the switch harness in through the back
    • Plug in the switch harness and insert the switch in place
    • Wire-tie any hanging wire behind the lower dash panel
    • Remove one of the 10mm bolts from the body
    • Insert the ground wire to the bolt
    • Tighten the 10mm bolt to the body
  8. step : Installing the Fuse Tab (11:48)
    • Lower the glove box
    • Push in the tabs on the glove box and bring it down
    • Remove a 10mm bolt from the body
    • Run the ground wire into the bolt
    • Tighten the 10mm bolt to the body
    • Cut the marker wiring to the same length
    • Strip about a half inch on the end of the wiring
    • Twist the wiring together
    • Strip about a half inch from the power folding wire
    • Twist the power folding wiring
    • Insert the power folding wiring into the fuse tab
    • Insert the marker wiring into the fuse tab
    • Plug the lights into headlamp #23
    • Plug the power fold fuse into #4
    • Push on the fuse cover
    • Test the mirrors
  9. step : Reinstalling the Side Panels (16:15)
    • Push on the lower panels on the center console
    • Push the kick panel in place
    • Push on the side carpet trim
    • Push in the side dash panel
  10. step : Reinstalling the Door Panel (16:55)
    • Put the water shield into place
    • Connect the latch cables to the door handle
    • Lift the door panel into place
    • Push in the door panel clips
    • Push in the speaker clips
    • Put on the lower gasket
    • Connect the speaker wiring lead
    • Insert the speaker into place
    • Tighten the 6mm screws to the speaker
    • Tighten the two 10mm screws on the bottom of the door panel
    • Tighten the 10mm screw behind the switch panel

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Electrical Tape

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Wire Cutters

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 6mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
SATISFIED CUSTOMER
I am very satisfied with the service I received. The lady I spoke to was very helpful. I received the driver side power mirror for my 2007 Lincoln LTD very fast. I took it to a body shop and it was installed. It looks great. He installed it for free. My local dealership wanted $1029.00 for the mirror assembly. They would have also charged me who knows how much to install it. It looks great. I am a very satisfied customer of 1A Auto. I found this website by accident while browsing the web looking for a mirror replacement. Thank you 1A Auto.
February 2, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
My truck has power fold mirrors with signal light. Will this mirror need to be wired in or does it come with a plug that will prevent the need to be wired in?
Morgan S on Oct 18, 2016
BEST ANSWER: Mirrors are intended to be an OE replacement for the specific options your model truck had. These are not intended to be wired or modified to function.
I have a 2010 f150 platinum addition. Will this mirror fit and will operate normal?
Anthony M on Oct 10, 2016
BEST ANSWER: When it comes to ordering replacement mirrors they need to be replaced in and "option for option" fashion. The new mirrors being ordered must have all the same options as the mirrors currently on your vehicle. If you order an option that your vehicle is not currently equipped with, the mirrors may not work properly.

How-to Video:

(19:17 min)

Tools List:

    Materials, Fluids, and Supplies

  • Electrical Tape

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Wire Cutters

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 6mm Socket



This part replaces:

  • Trail Ridge TR22037

Vehicle Fit

  • 2004 Ford F150 Truck New Body Style Upgrade Power Heated LED Turn Signal Power-Folding Puddle Light Textured Black & Chrome Caps Mirror Driver Side Trail Ridge
  • 2005-2008 Ford F150 Truck Upgrade Power Heated LED Turn Signal Power-Folding Puddle Light Textured Black & Chrome Caps Mirror Driver Side Trail Ridge
  • 2006-2008 Lincoln Mark LT Upgrade Power Heated LED Turn Signal Power-Folding Puddle Light Textured Black & Chrome Caps Mirror Driver Side Trail Ridge
Part #: 1AMRE02936

Ships Same Day for orders placed by 4 P.M. ET

Trail Ridge
Brand #: TR22037

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More