Mirror - 1AMRE02015

This replacement mirror is just what you need to get your vehicle in good working form again!

Mirror specifications:

• Fits the RH (Passenger Side)
• Power
• Folding (manual)
• Smooth black finish
  • Buyer can paint to any color desired or installed as is
    
• Replaces dealer part number: 25993769
• Direct replacement
• Built to strict quality control standards
• Not Heated
• Without turn signal

This mirror makes a good replacement and has good cost savings over a dealer mirror.

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Special Note:

• Unless otherwise noted, replacement mirrors will only work properly on vehicles with the exact same options. If your vehicle does not have the options listed in specifications, the mirror(s) may not function properly.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

step : Removing the Door Panel (0:36)

• Pull off the panel inside the door handle with a pick
• Pull off the panel inside the door pull with a pick
• Remove the T30 Torx bolt from the door handle
• Remove the two T30 Torx bolts from the door pull
• Pry the first door panel clip out with a door panel clip tool and a putty knife
• Pry out the remaining clips by hand
• Lift the door panel up and off
• Unclip the latch cable from the door handle
• Disconnect the window switch wiring harnesses

step : Removing the Mirror (2:33)

• Disconnect the mirror wiring harness
• Unclip the wiring harness from the door with pliers
• Pry out the mirror base trim panel clip with pliers
• Pull back the trim panel
• Remove the three 10mm nuts from the mirror
• Pull off the mirror and its gasket, feeding the wiring through the door

step : Installing the New Mirror (3:24)

• Put the new mirror into place, feeding the wiring through the door
• Pull the mirror wiring gasket through the door
• Fasten the three 10mm nuts onto the mirror
• Push the mirror base trim panel into place
• Push in the trim panel clip
• Clip the mirror wiring harness to the door
• Connect the mirror wiring harness

step : Reinstalling the Door Panel (3:55)

• Clip the latch cable to the door handle
• Connect the window switch wiring harnesses
• Lift the door panel into place
• Push in the door panel clips
• Insert the T30 bolt into the door handle
• Insert the two T30 bolts into the door pull
• Push on the door pull trim piece
• Push on the door handle trim piece