These replacement side repeater lamps are just what you need to get your vehicle in good looking form again!


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Mount on sides of front fenders
  • Replaces dealer part number: GJ6A-51-120E, GJ6A51120E
  • Injection molded plastic
  • Clear lenses
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Side Marker Light (0:33)
    • Remove the three clips on the back side of the front wheel well.
    • Remove the one screw near these clips.
    • Reach behind the inner fender and release the clip.
    • Reach up into the inner fender and push the tabs on the backside of the side marker light to release it.
    • Pull the light forward and disconnect the wiring harness.
  2. step : Reinstalling the Side Marker Light (1:17)
    • Plug in the wiring harness.
    • Push the front end of the light in first then the back to snap it into place.
    • Put the inner fender back into place.
    • Insert the clips.
    • Insert the screw.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2011-2013 Mazda 2 Repeater Light Pair
  • 2004-2011 Mazda 3 Repeater Light Pair
  • 2006-2010 Mazda 5 Repeater Light Pair
  • 2000-2006 Mazda MPV Repeater Light Pair

This part replaces:

  • OE # GJ6A-51-120E x2
Part #: 1ALPP00401

How-to Video:

(02:08 min)