Replaces

Mazda Miata MX-5 MPV Protege O2 Oxygen Sensor - 1AEOS00165

Specifications:

  • Direct Fit
    • Correct Connector No cutting or splicing
    • Correct wire length (19.6 inches) 
  • Upstream Sensor
    • as listed per application
  • 4 wire configuration
  • Replaces dealer part numbers: BP8J18861B, BP8J 18861 B, BP8J18861B9U, BP8J 18861 B9U, FSE118861, FSE1 18861, FSE118861A, FSE1 18861 A, FSE118861B, FSE1 18861 B, GY0118861A, GY01 18861 A, GY0118861A9U, GY01 18861 A9U, ZM0318861, ZM03 18861, ZM0318861A, ZM03 18861 A, ZM0318861A9U, ZM03 18861 A9U
  • Built and tested to strict quality control standards

Note: For clarification purposes:

  • Upstream location is between the catalytic converter and the engine
  • Downstream location is between the catalytic converter and the tailpipe

If you have a bad O2 sensor causing your vehicle to run poorly or fail an emission test then this is the part for you.

Our electrical and electronic parts are subject to strict quality control testing .  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Note:  You may be required to reset the vehicle’s computer after installation of this part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Identifying your Oxygen Sensors (0:57)
    • Upstream oxygen sensors are located in between the engine and the catalytic converter
    • Downstream oxygen sensors are located in the catalytic converter or farther away from the engine than the catalytic converter
    • Locate your vehicle's firing order diagram
    • The bank that contains cylinder one is bank one
    • The bank that does not contain cylinder one is bank two, even if it does not contain cylinder two

Tools needed for replacement:

    1A - No Tools Needed

  • No Tools Needed

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(03:08 min)

Tools List:

    1A - No Tools Needed

  • No Tools Needed




Vehicle Fit

  • 2000-2001 Mazda MPV Upstream Front Bank O2 Oxygen Sensor V6 2.5L
  • 2004-2005 Mazda Miata MX-5 MazdaSpeed Upstream O2 Oxygen Sensor L4 1.8L Turbo
  • 1999-2000 Mazda Protege Upstream O2 Oxygen Sensor L4 1.6L California Emissions
  • 2001 Mazda Protege Upstream O2 Oxygen Sensor L4 1.6L
Only 2 left in stock
Part #: 1AEOS00165

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More