Mazda 6 Vapor Canister Purge Solenoid Valve Dorman 911-702 - 1AEMX00065

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This Vapor Canister Purge Solenoid Valve is a new part. It mounts on the engine and is used to control the flow of vapors from the EVAPORATIVE system to the intake manifold. It is controlled by the vehicles main computer or ECM. When the ECM sends the activation signal, a plunger in the valve will move to seal the vent. The ability to seal the vent is necessary for the on board diagnosis of other evaporative loss system components. This solenoid valve is used only for diagnosis, and usually remains opened. When the vent is closed, under normal purge conditions, the evaporative loss system is depressurized and allows "EVAP Control System (Small Leak)" diagnosis. If this valve is defective, the Check Engine Light will illuminate to Set with Small Leak Diagnosis. Some of the trouble codes associated with this part being defective are: P1456, P1448, P0449, and P0455.


  • Brand new component
  • Replaces dealer part numbers: L33L-18-740B, L3K9-18-740B, L33L18740B, L3K918740B
  • Engine mounted
  • Direct replacement
  • Built to strict quality control standards

Over time and daily use the electronic valve can wear out causing the check engine light to set. If the valve is the problem, replace it now with this part.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Purge Valve Solenoid (0:32)
    • Loosen the hose clamps on the solenoid
    • Disconnect the hose from the solenoid
    • Disconnect the sensor connector
    • Remove the mounting rubber
  2. step : Installing the Purge Valve Solenoid (2:05)
    • Connect the wiring harness
    • Slide the rubber bracket onto the steel mounting bracket
    • Attach the hoses to the solenoid
    • Tighten the hose clamps

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2006-2008Mazda 6 Mazda 6 Vapor Canister Purge Solenoid Valve V6 3.0L Dorman 911-702
2006-2008Mazda 6 Mazda 6 Vapor Canister Purge Solenoid Valve L4 2.3L Dorman 911-702
2006Mazda 6 Mazda 6 Vapor Canister Purge Solenoid Valve L4 2.3L MazdaSpeed Dorman 911-702
Only 1 left in stock
Part #: 1AEMX00065

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: 911-702

How-to Video:

(03:35 min)