Mazda 6 Tail Light Pair - 1ALTP00543

This replacement Tail light is just what you need to get your vehicle in good looking form again!

This tail lamp features the following specifications:

• Comes as a PAIR
  • Fits both the LH (Driver) and RH (Passenger) Sides
• OUTER
• Replaces dealer part numbers: GP7B-51-160, GP7B51160, GP7B-51-150, GP7B51150
• Includes lens & Housing
• DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
• Direct replacement
• Has Black Bezel
  • Will fit models with a Chrome Bezel, but look cosmetically different

This tail light makes a great replacement and has good cost savings over a dealer unit.

Direct fit replacement for OEM assembly

Uses same wiring as original assembly.  No cutting or splicing required.

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

step : Removing the Tail Light (0:45)

• Peel back the trunk trim
• Press the connector and remove the socket wiring harnesses
• Remove the 10mm bolts from the tail light
• Remove the Phillips screws from the tail light
• Pry out the tail light

step : Installing the Tail Light (2:56)

• Connect the wiring harnesses
• Insert the tail light into place
• Tighten the 10mm bolts to the tail light
• Press the trim on