Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Location:   Outer

This outer tie rod end set is just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes As A Pair
  • Includes Both LH (Driver Side) & RH (Passenger Side) OUTERS
  • Direct replacement
  • Built to strict quality control standards

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

    Vehicle will need an alignment after repair is complete

  1. step : Removing the Wheel (0:25)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:08)
    • Loosen the 24mm jamb nut with a 24mm wrench
    • Remove the cotter pin
    • Remove the 14mm nut from the tie rod
    • Tap the end of the knuckle with a hammer to pop the stud out
    • Turn the tie rod counterclockwise to remove
  3. step : Installing the Outer Tie Rod (2:56)
    • Apply anti-seize to the threads
    • Thread the outer tie rod on to the jamb nut
    • Install the castle nut by hand
    • Tighten the 16mm castle nut with a socket and ratchet
    • Insert the cotter pin and fold the ends to secure it
    • Tighten the jamb nut with a 24mm wrench
  4. step : Reattaching the Wheel (4:29)
    • Slide the wheel into place
    • Start the 21mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 87 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Liquid Thread Locker

  • Pliers, Cutters & misc Wrenches

  • Wire Cutters

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 14mm Socket
  • 16mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 24mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2004-2014Mazda 3 Mazda 3 Outer Tie Rod Pair
2006-2010Mazda 5 Mazda 5 Outer Tie Rod Pair
2012-2013Mazda 5 Mazda 5 Outer Tie Rod Pair
Part #: 1ASFK02100


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:28 min)