Mazda 3 5 Front Lower Control Arm with Ball Joint Pair - 1ASFK01182

Frequently bought together

Warranty & Shipping
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair

These replacement front lower control arms are just what you need to bring back the safety and integrity of your vehicle's suspension and steering.


  • Comes as a PAIR
    • Fits both LH (Driver Side) or RH (Passenger Side) FRONT LOWER
  • Include ball joints & bushings
  • Replaces dealer part numbers: B32H-34-300D, B32H-34-350D, B32H34300D, B32H34350D, C51334300, C51334350
  • Direct replacements
  • Built to strict quality control standards

Worn or loose bushings or ball joints can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace those heavily rusted, rotted, or damaged control arms with the loose bushings with our high quality replacements.

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Our control arms are designed to be direct replacements for the original factory parts.  They are 100% brand new and require no modifications for installation.  No special tools are required because all of the bushings come pre-installed.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

5.00/ 5.0
11 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Thank you!
These were a perfect fit for my 07 Mazda 3. Definitely recommend. Will be purchasing more parts soon.
February 26, 2017
2005 mazda 3 control arms
Easy install. Self explanatory. So far a smooth ride no more clunking when i accelarate.
July 7, 2017
Mazda 5 Control Arm Set
These appear to be of good quality and installed as expected. Had to get creative to get the from bushing bolts out because the transaxel pan is in the way on the drivers side and the A/C compressor on the passenger side. Found out afterwards that the service manual recommends disconnecting one of the engine mounts and moving the engine forward slightly. My solution was to loosen the subframe bolts slightly (with a jack underneath so it couldnt fall if the bolts were backed out too far) and letting the subframe droop an 1/8". This was enough clearance on the drivers side. On the passenger side, I hade to jack up the engine slightly as well. The whole job is a wrestling match, but thats how most suspension work seems to go. I cant speak to the long term durability of the bushings and ball joints, but everything lined up well and fit as it should. Either way, this was much cheaper than replacing the individual bushings. The worst part of the job was getting the ball joint pinch bolt freed up and driven out. My only recommendation to 1A Auto is to wrap the arms in packing material. The air filled balloon-type packaging does nothing to hold these in place within the box and the box just barely survived the internal bashing it received.
August 8, 2017
Very fast delivery
The delivery came way faster than expected date. Items look very sturdy. Havent installed yet so cant review the item on that. Once installed I will return with an update. Thank you.
September 5, 2017
Great service good pars easy to order I will buy again
December 20, 2017
True fit
The control arm fit perfectly. Arrived in a timely manner. Took about an hour to install.
August 26, 2018
Right part at the right price, good quality, fast delivery
September 24, 2018
On time shipping
Highly recommended good quality. Affordable prices nice savings. My store to keep.
September 26, 2018
Amazing quality, price and shipping!
Why didnt I know about 1AAuto sooner? Seriously, customer service is amazing and the parts are great quality. I have searched the web for parts and did a lot of comparison and 1A Auto parts are good quality and the ordering process is stupid simple. They are now my first goto for all autoparts on my cars.
April 7, 2019
Right on!
Good price and quality!
May 7, 2019
Parts arrived fast and were direct fit
Easy install
September 17, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Should I be concerned about changing any other parts along with the control arms?
Rick E September 29, 2015
I Just changed mine and nothing else needed changed. However it will need a front end alignment after the change... Trust me!
Matt C September 29, 2015
Hi Rick. It all depends on what else may be worn out. I installed these control arms on a car with loose ball joints. You should always inspect the rest of the front end while you are in there. Particularly the tierod ends and struts as those are the other common components that wear out. The control arms come complete so there isnt much else you would need if thats all that is wrong.
Mike G September 30, 2015
It depends hiw old you car is. I also replaced shocks. Make sure to check your brakes and anything else that is worn. The axle can wear out if its an auto
Michael H September 30, 2015
I would say investigate the reason you are changing the control arms, chances are the struts are worn, and look at the tie rod ends & bearings, also I changed the control arms because the cv joints were shot!
Roland M October 1, 2015
Hi Rick, I replaced the chocks and struts as well because they made clunking noises. Mazda has problems with the rubber parts on all their engine and wheel mounts. You should check the engine mounts while you are at it. They are very easy to replace and it makes a hughe difference to the noise level and driving comfort of the vehicle. Hope this helps. Leif
Leif L October 2, 2015
These lower control arms do they fit a Mazda CX-5 2014 ?
Yeison R July 6, 2018
This part is not listed to fit your vehicle. We may have a part that is listed to fit! Please search our site using your vehicle info and then choose the appropriate category. All the parts we carry are guaranteed to fit the vehicle they are listed for. Thank you!
Jessica D July 6, 2018
I have no clue no longer have Mazda and had a 2007
Jessica H July 7, 2018
Sorry, I do not know. I only replaced them on my 2008 Mazda 5. I did have to use a jack on the motor to rotate it out of the way to get the Passenger control arm bolt out. I have rear AC option and a component for that was right in the way of the control arm bolt coming completely out. Good luck.
Todd B July 9, 2018
Kyle- F January 2, 2019
Not sure I own a Honda Pilot.
Al G October 8, 2019
Product description says this comes as a pair. Does this mean I will get a control arm for the left and right side?
Benjamin D September 12, 2019
Yes , left and right arms will be in the package
Anatoliy S September 12, 2019
Cam K September 12, 2019
Thanks for your inquiry. This kit is for the pair, yes.
Peter L September 12, 2019
Year Make Model Description
2004-2006Mazda 3 Mazda 3 Front Lower Control Arm with Ball Joint Pair
2007-2009Mazda 3 Mazda 3 (excluding Speed Model) Front Lower Control Arm with Ball Joint Pair
2006-2010Mazda 5 2006-10, 2012-14 Mazda 5 Front Lower Control Arm with Ball Joint Pair
2012-2014Mazda 5 2006-10, 2012-14 Mazda 5 Front Lower Control Arm with Ball Joint Pair
Part 1ASFK01182
In Stock

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.