This mass air flow sensor is just what you need to get your vehicle in good working order again!

Specifications:

  • Brand New Mass Airflow Sensor
    • Not remanufactured
    • No core charge
  • Replaces dealer part numbers: 8048225, 37980-RAD-L11, 37980-RNA-A01, 37980-RV0-A01, 37980RADL11, 37980RNAA01, 37980RV0A01
  • Is 100% computer tested prior to leaving manufacturer
  • Built to strict quality control standards

 

Installation Notes:

1. Make sure the air filter is in good condition and replace if necessary.
2. Clean out and inspect the intake hose when replacing this part. Moving the intake hose during replacement can loosen dirt which can then damage the new sensor.

This item is an electrical part. These units are tested prior to shipment.

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Note:  You may be required to reset the vehicle’s computer after installation of this part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Air Filter Housing Cover (0:20)
    • Press the tab on the wiring bracket
    • Disconnect the meter connector
    • Unclip the air box housing cover
    • Remove the cover
  2. step : Removing the Mass Air Flow Sensor (1:12)
    • Remove the two Phillips screws from the mass air flow sensor
    • Remove the sensor
  3. step : Installing the Mass Air Flow Sensor (1:42)
    • Insert the sensor into the housing cover
    • Tighten the two Phillips screws
  4. step : Installing the Air Filter Housing Cover (2:22)
    • Press the air filter housing box cover into place
    • Pull up on the clips
    • Connect the sensor
    • Press on the wiring bracket

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2007-2013 Acura MDX Mass Air Flow Sensor V6 3.7L
  • 2007-2012 Acura RDX Mass Air Flow Sensor L4 2.3L Turbo
  • 2009-2012 Acura RL Mass Air Flow Sensor V6 3.7L
  • 2009-2014 Acura TL Mass Air Flow Sensor
  • 2010-2014 Acura TSX Mass Air Flow Sensor V6 3.5L
  • 2010-2013 Acura ZDX Mass Air Flow Sensor V6 3.7L
  • 2003-2007 Honda Accord Mass Air Flow Sensor
  • 2008-2012 Honda Accord Mass Air Flow Sensor V6 3.5L
  • 2006-2011 Honda Civic Mass Air Flow Sensor L4 1.8L
  • 2010-2012 Honda Crosstour Mass Air Flow Sensor V6 3.5L
  • 2009-2010 Honda FIT Mass Air Flow Sensor L4 1.5L
  • 2010-2014 Honda Insight Mass Air Flow Sensor
  • 2007-2017 Honda Odyssey Mass Air Flow Sensor V6 3.5L
  • 2009-2011 Honda Pilot Mass Air Flow Sensor V6 3.5L
  • 2009-2011 Honda Ridgeline Mass Air Flow Sensor V6 3.5L
Part #: 1AEAF00124

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(03:18 min)