Replaces

Mass Air Flow Sensor with Housing - 1AEAF00026

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This mass air flow sensor is just what you need to get your vehicle in good working order again!

Specifications:

  • Brand New
    • not remanufactured
    • No core charge
  • Fits in between air cleaner and air intake hose
  • Is 100% computer tested prior to leaving manufacturer

Installation Notes:

1. Make sure the air filter is in good condition and replace if necessary.
2. Clean out and inspect the intake hose when replacing this part. Moving the intake hose during replacement can loosen dirt which can then damage the new sensor.

This item is an electrical part. These units are tested prior to shipment.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Air Box Lid (0:49)
    • Open and support the hood
    • Loosen the two hose clamps on the air box
    • Pull the intake hose off the air box
    • Disconnect the wiring harnesses from the air box
    • Carefully unclip the vacuum hoses from the air box
    • Pry the vacuum hoses off the air box with a flat blade screwdriver
    • Unclip the wire from the air box
    • Unclip the two air box clips
    • Pull the air pump hose off the air box
    • Pull off the air box lid
  2. step : Removing the Mass Air Flow (MAF) Sensor (2:45)
    • Remove the two 10mm bolts from the MAF sensor
    • Pull the MAF sensor off the air box lid
    • Check that the o-ring is in good condition
  3. step : Installing the New MAF Sensor (3:32)
    • Pull the covers off the new MAF sensor
    • Put the new MAF sensor onto the air box lid with the airflow arrow pointing away from the air box
    • Insert the two 10mm bolts into the MAF sensor
  4. step : Reinstalling the Air Box Lid (4:26)
    • Put the air box lid into place
    • Clip on the two air box clips
    • Reconnect the wiring harnesses to the air box
    • Line up the intake hose tab with the MAF sensor slot
    • Push the hose on
    • Clip the vacuum hoses onto the air box
    • Connect the vacuum hoses to the air box
    • Clip the wire onto the air box
    • Connect the air pump hose to the air box
    • Tighten the two hose clamps on the air box
    • Close the hood

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Right price, perfect fit, quick delivery
I compared 1aautos price to the others, and didnt want to pay THAT much for someones name (when the warranty is the same). Delivery came sooner than I expected, and the fit was perfect. Although the installation video wasnt an exact match, it was helpful. Even with a perfect match, it took this slowpoke 35 minutes, but its working as expected, and the CEL cleared. Thanks!
October 9, 2017
Fixed my problem.
Car was sputtering and stalling. This fixed the problem.
February 25, 2018
MAF sensor
Great service, part fit perfectly and prompt delivery. Two thumbs up!
April 26, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998Audi A4 Audi A4 Mass Air Flow Sensor with Housing L4 1.8L Turbo (Built After 11/97 Production Date)
1999Audi A4 Audi A4 Mass Air Flow Sensor with Housing L4 1.8L Turbo
2000Audi A4 Audi A4 (Engine ID AEB) Mass Air Flow Sensor with Housing L4 1.8L Turbo
1998Audi A4 Quattro Audi A4 Quattro Mass Air Flow Sensor with Housing L4 1.8L Turbo (Built After 11/97 Production Date)
1999Audi A4 Quattro Audi A4 Quattro Mass Air Flow Sensor with Housing L4 1.8L Turbo
2000Audi A4 Quattro Audi A4 Quattro (Engine ID AEB) Mass Air Flow Sensor with Housing L4 1.8L Turbo
1996-1999Volkswagen Cabrio VW Cabrio Mass Air Flow Sensor with Housing L4 2.0L
1996-1998Volkswagen Golf VW Golf Mass Air Flow Sensor with Housing L4 2.0L
1999Volkswagen Golf VW Golf (Engine ID ABA) Mass Air Flow Sensor with Housing L4 2.0L
1996-1998Volkswagen Jetta VW Jetta Mass Air Flow Sensor with Housing L4 2.0L
1999Volkswagen Jetta VW Jetta (Engine ID ABA) Mass Air Flow Sensor with Housing L4 2.0L
1996Volkswagen Passat VW Passat Mass Air Flow Sensor with Housing L4 2.0L (Built After 8/95 Production Date)
1997Volkswagen Passat VW Passat Mass Air Flow Sensor with Housing L4 2.0L
1998Volkswagen Passat VW Passat Mass Air Flow Sensor with Housing L4 1.8L Turbo
1999-2000Volkswagen Passat VW Passat (Engine ID AEB) Mass Air Flow Sensor with Housing L4 1.8L Turbo
Part #: 1AEAF00026


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:41 min)