This new mass air flow sensor is just what you need to get your vehicle in good running order again!

Specifications:

  • Brand New Sensor
  • 4 pin connector
  • Direct replacement
  • Built to strict quality control standards

Installation Notes:

1. Make sure the air filter is in good condition and replace if necessary.
2. Clean out and inspect the intake hose when replacing this part. Moving the intake hose during replacement can loosen dirt which can then damage the new sensor.

This item is an electrical part. These units are tested prior to shipment.

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Note:  You may be required to reset the vehicle’s computer after installation of this part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Move the air intake tube out of the way. (1:00)
    • Loosen the clamps and disconnect the tube with your screwdriver.
    • Unclip the radiator hose.
  2. step : Remove the air flow sensor (1:35)
    • Disconnect the wiring harness.
    • Remove the hose clamp and use a screwdriver to break the seal to pull off the air flow sensor.
  3. step : Install the new airflow sensor (2:40)
    • Transfer the seal ring to the new sensor.
    • Mount the airflow sensor and tighten the clamp.
    • Reconnect the wiring harness.
    • Reconnect the intake tube and clip the radiator hose on.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Mass air flow sensor
The part was a perfect match. Would recommend thid part at the price and timely manner that I received it was great. Can't go wrong here
February 4, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-2000 Infiniti QX4 Mass Air Flow Sensor Meter
  • 1999-2002 Mercury Villager Mass Air Flow Sensor Meter
  • 1999-2004 Nissan Frontier Mass Air Flow Sensor Meter V6 3.3L
  • 1998-2000 Nissan Pathfinder Mass Air Flow Sensor Meter
  • 1999-2002 Nissan Quest Mass Air Flow Sensor Meter
  • 2000-2004 Nissan Xterra Mass Air Flow Sensor Meter V6 3.3L

This part replaces:

  • OE # 226807B001
  • OE # 226807B000
  • OE # 226805J000
  • Hollander 336-60508, 336-60542
  • Standard Motor Products MF0897N
Part #: 1AEAF00060

How-to Video:

(04:58 min)