Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
Why Delphi?
As an Original Equipment Supplier, Delphi Automotive products from 1A Auto come directly from the source. You wont have to worry about going to the dealership for Original Equipment - these parts are the exact same as the original. Delphi products come with the same quality from the dealership at a lower cost to you.
Install Tip: You may be required to reset the vehicle computer after installation of this part.
Item Condition:
New
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Tools used
Tools used
All right, friends. To get started on a mass airflow sensor, we're gonna first have to disconnect the wiring. If you were to look underneath the connector, you're gonna find a red tab, grab onto that with something small like a pocket screwdriver or a pick and pull it towards the front of the vehicle. Once you've done that, release the tab and separate the unit. There we are. Always check to make sure you don't see any funny colors under there. This one looks great. Now we're gonna remove our two mounting bolts, you're gonna use a T20 Torx bit to do that. Remove your mass airflow sensor, set it aside.
Now it's gonna be time to install our brand new mass air flow sensor. Let's go ahead and put it so the sensing unit is going to be facing towards where the air filter is, you don't want it facing in the opposite direction, it won't function. Go ahead and slide it right in. Start in both your bolts and then snug them up. There we are. Let's go ahead and connect in the new mass airflow sensor. Of course, lock it in and then give it a nice tug and make sure it's completely secured.
