This replacement Manifold Absolute Pressure Sensor (MAP) is a new aftermarket part. It is just what you need to get your vehicle in good running condition again!

How this part works is that it measures the intake manifold pressure and relays this information to the vehicles ECM or main computer. The ECM then uses this data to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion.

A bad or malfunctioning MAP sensor will often cause a service engine light error code, and or cause a no start condition, or rough running due to inaccurate ignition and fuel timing.

This MAP sensor features:

  • Replaces dealer part numbers: 37830P05A01, 37830-P05-A01
  • Direct replacement
  • Built to strict quality control standards
  • 100% factory tested
  • 3 Pin Connector

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Map Sensor for 97 Honda Accord
Part was shipped very soon, got the part in 2 days, part was exactly what I needed, will defiantly order from 1A again.
March 19, 2018
Purchased
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 4 answers
Where is the maf sensor on a 97 Accord cd5?
Dustin P on Sep 30, 2015
BEST ANSWER: Hi,
The MAP sensor can be located on the top of the engine near the windshield. Its tucked slight under the hood so you may need a short screwdriver or an angled one. Hope that helps and good luck!
Where is the map on 98 civic of automatic trans?
Joeee on Mar 9, 2018
BEST ANSWER: We do not currently have any installation instructions or videos for this specific part. Searching an online automotive forum specific to your vehicle may help as well. Many people like posting their own repairs online and someone may have done a repair similar to yours. Please let us know if you have any further questions.

Vehicle Fit

  • 1997 Acura CL MAP Sensor L4 2.2L
  • 1997-1999 Acura CL MAP Sensor V6 3.0L
  • 1998-1999 Acura CL MAP Sensor L4 2.3L
  • 1994-2001 Acura Integra MAP Sensor L4 1.8L
  • 1999 Acura TL MAP Sensor V6 3.2L
  • 1994-1997 Honda Accord MAP Sensor L4 2.2L
  • 1995-1999 Honda Accord MAP Sensor V6 2.7L
  • 1998-2002 Honda Accord MAP Sensor L4 2.3L
  • 1998-1999 Honda Accord MAP Sensor V6 3.0L
  • 1997-2001 Honda CR-V MAP Sensor L4 2.0L
  • 1992-2000 Honda Civic MAP Sensor L4 1.6L
  • 1994-1995 Honda Civic MAP Sensor L4 1.5L
  • 1994-1995 Honda Civic Del Sol MAP Sensor L4 1.5L
  • 1994-1997 Honda Civic Del Sol MAP Sensor L4 1.6L
  • 1995-1998 Honda Odyssey MAP Sensor L4 2.2L
  • 1999 Honda Odyssey MAP Sensor V6 3.5L
  • 1996-2001 Honda Prelude MAP Sensor L4 2.2L
  • 1996 Honda Prelude MAP Sensor L4 2.3L
  • 2000-2003 Honda S2000 MAP Sensor L4 2.0L
  • 2004-2005 Honda S2000 MAP Sensor L4 2.2L
  • 1996-1999 Isuzu Oasis MAP Sensor L4 2.2L

This part replaces:

  • OE # 37830P7AN11
  • OE # 37830P0GS00
  • OE # 37830P05A01
  • Standard Motor Products AS62
Part #: 1AEMP00003

Ships Same Day for orders placed by 4 P.M. ET