Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the tail light (0:40)
    • Use your Phillips screwdriver to remove the two anchor screws.
    • Pull out the tail light and unplug the wiring harness.
    • Twist and unplug the bulbs to replace them.
  2. step : Install the new tail light (1:35)
    • You can re-install the old assembly if you were just changing the bulbs.
    • Plug in the bulbs and wiring harness.
    • Line up the two tabs and click the tail light assembly into the truck.
    • Screw in the two Phillips screws.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004 Chevy Colorado Chrome Bezel 6 Piece Set Lighting Kit
  • 2005-2008 Chevy Colorado Xtreme Chrome Bezel 6 Piece Set Lighting Kit
  • 2009-2012 Chevy Colorado Chrome Bezel 6 Piece Set Lighting Kit
  • 2004-2012 GMC Canyon Chrome Bezel 6 Piece Set Lighting Kit
  • 2006 Isuzu i-280 Chrome Bezel 6 Piece Set Lighting Kit
  • 2007-2008 Isuzu i-290 Chrome Bezel 6 Piece Set Lighting Kit
  • 2006 Isuzu i-350 Chrome Bezel 6 Piece Set Lighting Kit
  • 2007-2008 Isuzu i-370 Chrome Bezel 6 Piece Set Lighting Kit
Part #: 1ALHT00258


How-to Video:

(02:55 min)