Specifications:
  • Brand New Lighting Kit
  • Comes as a 2 Piece Kit
    • Fits RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

  • Kit Includes: (1) Parking Light
  • Kit Includes: (1) Headlight
  • Quantity: 2 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Handling the Bulbs (0:52)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : Just the bulbs (0:54)
    • Open the door above the headlight assembly.
    • Pull back the rubber ring around the bulb and twist and pull to remove the bulb.
    • Unplug it from the harness.
    • Replace and snug the rubber ring down onto the base of the bulb.
  3. step : Remove the headlight assembly (2:30)
    • Unscrew the two Phillips screws at the top of the headlight.
    • Remove the parking light assembly and unplug the bulbs.
    • Unclip the headlight assembly where the adjustors clip to the car with a flat blade screwdriver.
    • Unplug the harness.
    • Remove the adjustor clip from the car if it doesn't come out with the assembly.
  4. step : Install headlight assembly (5:00)
    • Adjust the adjustor bolts to match the old assembly.
    • Plug the bulbs and harness into the new headlight assembly
    • Clip the headlight assembly back into place.
    • Plug the parking light bulbs into the parking light assembly.
    • Line it up and screw in the two Phillips screws using your Phillips screwdriver.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Headlight Assembly Passenger Side
The headlight assembly unit passenger side was exactly the perfect fit. Shipping was super fast and it arrived in just a few days. The packaging was superb. Each section was packaged with bubble wrap inside boxes, then those boxes were packed in a big box with lots of bubble wrap and air pillows. Bonus is unit comes with headlight bulb already preinslalled in the unit.
April 8, 2018
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Will is kit work with the explorer sport 2 door model?
Cathy on Jul 17, 2016
BEST ANSWER: 1995-2000 Ford Explorer Headlight and Corner Light Kit Passenger Side FITS 2 OR 4 DOOR
2001 Ford Explorer 4 Door Headlight and Corner Light Kit Passenger Side FITS 4 DOOR ONLY

Vehicle Fit

  • 1995-2000 Ford Explorer 2 Piece Set Lighting Kit Passenger Side
  • 2001 Ford Explorer 4 Door 2 Piece Set Lighting Kit Passenger Side
  • 1997 Mercury Mountaineer 2 Piece Set Lighting Kit Passenger Side

This part replaces:

  • TYC 20-3100-00-1
  • TYC 18-3154-01-1
  • Hollander 114-264R
  • Hollander 116-3219R
  • OE # F5TZ 13008 A
  • OE # F67Z 13200 AA
  • Partslink FO2503122
  • Partslink FO2521130
Part #: 1ALHT00053

How-to Video:

(08:34 min)