Does your trunk have trouble staying up? The problem could be the lift supports. These get weak over time and require replacing. No need to lose money at the dealer for this simple do it yourself replacement. Our lift supports are just what you need to allow your trunk to stay up again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Replaces dealer part number: 4814200AF
  • 100% tested prior to leaving the factory
  • Direct replacements
  • Built to strict quality control standards
  • Do NOT fit models with Trunk Spoiler

Note:

It is necessary to reuse your original hardware, as new hardware is not included with this item.

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Trunk Pistons (0:33)
    • Pry out the clips at the top and bottom of the piston.
    • Pull the piston off. (Make sure your trunk is supported so that it doesn’t fall)
  2. step : Replacing the Trunk Pistons (1:33)
    • Line up the holes on the piston and push them into place.
    • Repeat process on other side if trunk still does not work properly.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
My husband and I, love them we went months without any, we always had to hold it up with our hands, we are more than happy to have them, don't have to worry about the trunk falling on our head anymore because that really hurts. Now that I have found 1A Auto, we will be doing all our business with you all. Thanks Cynthia & Michael.
August 1, 2017
Purchased
1 year ago
Great replacement that works fine.
Purchase these for the trunk lid on my daughter Dodge Stratus.
Her trunk lid started to resemble a guillotine. The slightest move in the trunk with slam shut up. It was dangerous. I installed these new struts and they work well even in the very cold weather .
February 16, 2017
Purchased
over 2 years ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2006 Chrysler Sebring Coupe Trunk Lift Support Pair for Models without Spoiler
  • 2001-2006 Chrysler Sebring Sedan Trunk Lift Support Pair for Models without Spoiler
  • 2006-2008 Dodge Charger Trunk Lift Support Pair for Models without Spoiler
  • 2001-2006 Dodge Stratus Trunk Lift Support Pair for Models without Spoiler
Part #: 1ALSP00152

How-to Video:

(02:14 min)