Replaces

Lexus RX330 RX350 RX400h Brake Kit Nakamoto CD996, CD1005, 42431-48041, 31392 - 1ABFS01868

This brake rotor & pad kit is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • 8 Piece FRONT & REAR Brake Pad Set
  • Direct replacements
  • Professional Grade CERAMIC Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a Set of 4
    • Fits both LH (Driver Side) or RH (Passenger Side) Front & Rear
  • Fits 5 Stud Wheels
  • Direct replacement
  • Built to strict quality control standards

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Kit Includes: (2) Rear Replacement Brake Rotors

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:23)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (2:33)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (6:22)
    • Remove 17mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the plug from the rotor
    • Adjust the adjustor with a flat blade screwdriver to release the brake shoes
    • Pull the rotor off
  4. step : Preparing the New Brake Pads and Rotors (13:58)
    • Remove the brake pad slides
    • Apply grease to the caliper slides
    • Clip in the brake pad slides
  5. step : Installing the New Brake Rotor (18:47)
    • Clean the rotor with brake parts cleaner
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Adjust the emergency brake adjustor
    • Plug on the dust cap
    • Put the caliper bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 58 foot-pounds of torque
  6. step : Installing the New Brake Pads (21:12)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Clean the pad surface with brake parts cleaner
    • Apply grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Add grease to the brake pad slide bolts
    • Thread bolts by hand
    • Tighten bolts to 32 foot-pounds
    • Remove the lug nut from the rotor
  7. step : Reattaching the Wheel (26:29)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 76 foot-pounds in a crossing or star pattern
  8. step : Testing the Brakes (27:45)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Hammer
  • Jack Stands
  • Rubber Mallet
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner
  • Paper Towels
  • Bungee Cord
  • Anti-Seize Grease

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

  • Sockets - SAE

  • Complete SAE Socket Set

4.3 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
1
0
Great brakes
These brakes & rotors are great so far! No noise or shake when coming to a stop!
November 13, 2017
Purchased
8 months ago
Set of rotors and pads
Every thing was as ordered and Recieved the rotors in record time it was a pleasure to do business with u Many Thanks
October 20, 2017
Purchased
9 months ago
FOUR WHEEL BRAKE KIT FOR LEXUS RX350
All of these brake parts fit perfectly as expected and the cost was half of what the auto part stores near me charge. Shipping was only a couple of days also. Thanks for the great service.
........RB
June 18, 2017
Purchased
1 year ago
Rust immediately
Began rusting within days after installation. One month in, all rust - looks horrible. Highly recommend ceramic instead.
March 27, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
This does not specify if they fit 2005 J vin. Will they fit Japan built?
Cambonesian on Apr 23, 2018
BEST ANSWER: As long as you have one of the following models it does not matter if it was built in Japan or not:

2004-2006 Lexus RX330
2007-2009 Lexus RX350
2006-2008 Lexus RX400h
Hello. Can I use this for my 2004 Lexus RX 330 AWD?
Ricky L on Mar 25, 2017
BEST ANSWER: Yes, these brakes will fit your vehicle!

Vehicle Fit

  • 2004-2006 Lexus RX330 Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 2007-2009 Lexus RX350 (Japan Built Models (1st VIN Digit J)) Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 2006-2008 Lexus RX400h Front & Rear Premium Posi Ceramic Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD996, CD1005, 42431-48041, 31392
Part #: 1ABFS01868

Nakamoto
Brand #: CD996, CD1005, 42431-48041, 31392

How-to Video:

(29:07 min)