Lexus GS300 GS400 GS430 IS300 SC430 Front Premium Posi Ceramic Cross Drilled & Slotted Performance Brake Kit - 1APBS00058

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Front Brake Rotor Specifications:
      5 Lug
      11.65 in. (296mm)
  • Brake Pad Friction Material:   Ceramic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Kit Includes:
      (1) Front Ceramic Brake Pad Set
      (2) Front Performance Brake Rotors
  • Product Line:   Performance
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant
      Thermal Scorched

This performance brake rotor & posi pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Ceramic brake pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver) & RH (Passenger) Side FRONT
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Stud Wheels
  • Direct replacement
  • Built to strict quality control standards

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
True Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing and Cleaning the Brakes (0:20)
    • Loosen the wheel lug nuts with a 21 mm socket
    • Raise and support the vehicle
    • Remove the brake bleeder cap
    • Open the brake bleeder with an 8 mm wrench
    • Allow a small amount of brake fluid to escape
    • Tighten the bleeder screw
    • Remove the two 14 mm caliper slider bolts
    • Remove the brake caliper and support it with the caliper hanger
    • Remove the brake pad anti-rattle clips
    • Remove the brake pads, using a pry bar and hammer as necessary
    • Loosen the two 17 mm caliper bracket bolts, then remove them
    • Remove the caliper bracket
    • Remove the brake pad tins that are set into the caliper bracket by prying them out
    • Remove the two caliper sliders
    • Clean the caliper sliders and caliper slider holes as necessary
    • Clean the pad tins and surface on the caliper where they mount
    • Apply brake grease to the caliper surface where the pad tins mount
    • Replace the pad tins
    • Apply brake grease to the caliper sliders
    • Replace the caliper sliders and rotate them to spread the grease
    • Remove the brake rotor
    • Clean the wheel hub as necessary
  2. step : Installing the Brakes (31:00)
    • Install the rotor
    • Open the caliper bleeder screw and connect to a drain hose or have a catch pan available
    • Depress the caliper pistons with a brake caliper compressor tool
    • Close the bleeder screw
    • Replace the caliper bracket with the 17 mm mounting bolts
    • Torque the 17 mm bolts to 87 ft-lb
    • Install the brake pads into the caliper bracket
    • Replace the brake pad anti-rattle clips
    • Optionally apply a small amount of brake crease to the brake caliper surfaces that contact the pads for additional sound dampening
    • Replace the brake caliper with the 14 mm caliper bolts
    • Torque the 14 mm caliper bolts to 25 ft-lb
    • Spin the rotor to check for any interference or improper installation
    • Pump the brake pedal slowly to seat the brake pistons against the pads and the pads against the rotor
    • Open the 8 mm bleeder screw to allow fluid to drip until there are no air bubbles
    • Close the bleeder screw
    • Replace the bleeder screw cap
    • Replace the wheel and lug nuts
    • Lower the vehicle
    • Torque the lug nuts in a star pattern to 76 ft-lb

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • 3/8 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 21mm Socket

  • Specialty Tools

  • Brake Caliper Hanger
  • Brake Caliper Compressor Tool. Quad Piston. Ratchet Style.

  • Wrenches - Metric

  • 8mm Wrench
  • 10mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1993-2005Lexus GS300 Lexus GS300 Front Premium Posi Ceramic Cross Drilled & Slotted Performance Brake Kit
1998-2000Lexus GS400 Lexus GS400 Front Premium Posi Ceramic Cross Drilled & Slotted Performance Brake Kit
2001-2005Lexus GS430 Lexus GS430 Front Premium Posi Ceramic Cross Drilled & Slotted Performance Brake Kit
2001-2005Lexus IS300 Lexus IS300 Front Premium Posi Ceramic Cross Drilled & Slotted Performance Brake Kit
2002-2010Lexus SC430 Lexus SC430 Front Premium Posi Ceramic Cross Drilled & Slotted Performance Brake Kit
Part 1APBS00058
In Stock

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.