Replaces

Lexus GS300 GS400 GS430 Front Driver Side Power Window Regulator without Motor TRQ - 1AWRG01092

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   without Motor
  • Operation:   Power

This replacement power window regulator without motor is just what you need to get your Lexus GS300, GS400, & GS430 in good shape again!

This power window regulator without motor features the following specifications:

  • LH (Driver Side) FRONT DOOR
  • Replaces dealer part numbers: 69802-30240, 6980230240
  • Power operation
  • Direct replacement
  • Built to strict quality control standards
  • Does not include motor. Buyer will need to reuse original motor

This Lexus GS300, GS400, & GS430 power window regulator without motor makes a great replacement and has good cost savings over a dealer unit.

Installation

  • This repair is easier than you may think. You'll find our installation tips helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
    • You can use your existing hardware and wiring harnesses. This Regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure the cables and all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it you will have no issues.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Please Note:

This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Door Panel (0:22)
    • Remove the handle trim piece with a pick
    • Remove the Phillips screw behind the door handle
    • Remove the Phillips screw inside the rubber trim piece
    • Remove the Phillips screw below the door pull
    • Remove the Phillips screw above the door latch
    • Remove the four Phillips screws along bottom of the panel
    • Pry out the door panel with a flat blade screwdriver
    • Lift door panel up
    • Disconnect the interior door handle cables
    • Disconnect the three electrical connectors
  2. step : Removing the Window Regulator (3:00)
    • Raise the window by hand
    • Hold the window in place with painter's tape
    • Carefully peel back the water shield with a trim tool
    • Remove the two 10mm bolts that hold the window to the regulator
    • Turn the key to the on position
    • Connect the electrical connector to the master switch
    • Lower the window regulator from the window
    • Turn the key to the off position
    • Disconnect the electrical connector
    • Remove the four 10mm bolts from the regulator
    • Disconnect the window motor electrical connector
    • Pry out the electrical connector from the door with a trim tool
    • Press the rubber boot on the connector wiring into the door with a flat blade screwdriver
    • Pull the window regulator out through the door
  3. step : Preparing the Window Regulator (9:57)
    • Remove the three T25 Torx screws from the window motor on the old window regulator
    • Remove the window motor
    • Inspect the window motor gears for rounding or strips
    • Transfer the window motor to the new window regulator
    • Tighten the T25 Torx screws to the window motor
  4. step : Installing the Window Regulator (14:00)
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Pull the wiring connector and rubber boot through the door
    • Connect the electrical connector
    • Clip the wire to the door
    • Tighten the four 10mm bolts to the window regulator
    • Connect the electrical connector to the master switch
    • Raise the window regulator from the window
    • Turn the key to the off position
    • Disconnect the electrical connector
    • Remove the painter's tape from the window
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
  5. step : Installing the Door Panel (21:15)
    • Press the water shield into place
    • Connect the three electrical connectors
    • Connect the interior door handle cables
    • Lift panel up onto the door, push front end on first
    • Press in door panel clips
    • Replace the Phillips screw behind the door handle
    • Replace the Phillips screw inside the rubber trim piece
    • Replace the Phillips screw below the door pull
    • Replace the Phillips screw above the door latch
    • Replace the four Phillips screws along bottom of the panel
    • Replace the handle trim piece

Tools needed for replacement:

    General Tools

  • Pick

  • Materials, Fluids, and Supplies

  • Gloves

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

  • Star Drivers & Sockets

  • T25 Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998-2005Lexus GS300 Lexus GS300 Front Driver Side Power Window Regulator without Motor
1998-2000Lexus GS400 Lexus GS400 Front Driver Side Power Window Regulator without Motor
2001-2005Lexus GS430 Lexus GS430 Front Driver Side Power Window Regulator without Motor
Only 9 left in stock
Part 1AWRG01092
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: WRA51786