Replaces

Lexus ES350 Toyota Camry Windshield Washer Reservoir - 1AWWR00169

Specifications:

  • Brand New Washer Bottle
  • Includes washer pump
  • Direct replacement

Part Details

  • Includes: with Washer Pump

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Front Bumper (0:24)
    • Place tape along the edge of the bumper to mark its location
    • Remove the 10mm bolts from the splash shield
    • Remove the splash shields
    • Turn the clip in the fender liner on either side
    • Pull back the fender liner
    • Remove the 10mm bolt from the bumper on either side
    • Remove the 10mm bolt from the metal support on top of the bumper
    • Pry up the plastic pin from the headlight with a flat blade screwdriver
    • Remove the Phillips retainer from the bracket
    • Pry up the plastic pin from the headlight with a flat blade screwdriver
    • Pull the bumper off of the bracket
  2. step : Removing the Washer Fluid Pump (6:15)
    • Turn the wheel out
    • Remove the 10mm bolt from the fender liner to gain access
    • Have a drain pan ready
    • Disconnect the sensor from the pump
    • Remove the pump
  3. step : Removing the Overflow Bottle (7:13)
    • Disconnect the level sensor
    • Pry the wires out of the bottle
    • Remove the three 10mm bolts from the bottle
    • Pry the level sensor out with a flat blade screwdriver
  4. step : Installing the Overflow Bottle (8:15)
    • Remove the rubber seal from the sensor
    • Press the sensor seal into the new bottle
    • Insert the tank up into place
    • Tighten the 10mm bolts to the bottle
  5. step : Installing the Washer Fluid Pump (9:24)
    • Connect the level sensor
    • Connect the hose to the pump
    • Press the grommet into the tank
    • Press the pump into the tank
    • Connect the sensor
    • Connect the splash shield
    • Tighten the 10mm bolt to the splash shield
  6. step : Installing the Front Bumper (10:24)
    • Hang the bumper on the top brackets
    • Push the bumper into the bracket on both sides
    • Press in the push clips to the headlights
    • Tighten the Phillips retainers to the metal bracket
    • Press in the clips to the bumper
    • Tighten the screw to the bumper behind the fender liner on both sides
    • Replace the splash shield
    • Tighten the 10mm bolts to the splash shield
  7. step : Refilling the Washer Fluid (13:00)
    • Open the washer fluid cap
    • Fill the washer fluid bottle
    • Close the cap

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant
  • Painter's Tape

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2007-2012Lexus ES350 Lexus ES350 with Low Fluid Sensor Windshield Washer Reservoir with Washer Pump
2007-2011Toyota Camry Toyota Camry with Low Fluid Sensor Windshield Washer Reservoir with Washer Pump
Part #: 1AWWR00169


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(13:19 min)