Replaces

Lexus ES350 Toyota Camry Intermediate Steering Shaft Dorman 425-465 - 1ASTC00158

This replacement steering column intermediate shaft with coupler is just what you need to get your car steering in good working condition again!

Often on original steering columns, the shafts with the coupler wear out. At first it will usually just make a clicking, or ticking noise when moving the steering wheel. This can usually be felt. If not replaced, over time it can cause not only a loose steering feel, but a dangerous safety concern if the joint separates.

Specifications:

  • Brand New LOWER Intermediate Steering Shaft
  • Replaces dealer part numbers: 45220-06114, 4522006114
  • Direct replacement
  • Built to strict quality control standards

This intermediate steering shaft with couplers is a great replacement part and provides a good cost savings over the price of a dealer part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:24)
    • Pry off the hub cap with a pry bar
    • Loosen the lug nuts with a 21mm socket and breaker bar
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull the wheel off the hub
  2. step : Removing the Intermediate Steering Shaft (1:13)
    • Make sure the wheel is straight ahead
    • Remove the bolt from the steering shaft with a 12mm socket
    • Underneath the dash, remove the bolt from the steering shaft with a 12mm wrench
    • Remove the clamp from the steering shaft boot with a flat blade screwdriver
    • Release the shaft from the steering rack
    • Pull the shaft up and out of the boot
  3. step : Installing the Intermediate Steering Shaft (5:52)
    • Insert the steering shaft into the boot
    • Underneath the dash, connect the shaft's end and tighten the 12mm bolt
    • Connect the boot and reinstall the clamp with a flat blade screwdriver
    • Clean off the stem on the steering rack
    • Grease the steering rack with white grease
    • Connect the steering shaft to the rack
    • Tighten the 12mm bolt to the shaft
  4. step : Installing the Wheel (9:32)
    • Slide the wheel onto the hub
    • Start the lug nuts with the tapered side facing the wheel
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts to 76 foot-pounds in a star pattern
    • Line up the hub cap with the valve stem
    • Push the hub cap onto the wheel

Tools needed for replacement:

    General Tools

  • Hammer
  • Center Punch

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner
  • Paper Towels
  • White Grease
  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 12mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2007-2012 Lexus ES350 Lower Intermediate Steering Shaft Dorman 425-465
  • 2007-2011 Toyota Camry Lower Intermediate Steering Shaft Dorman 425-465

This part replaces:

  • OE # 4522006114
  • Dorman 425-465
Only 2 left in stock
Part #: 1ASTC00158



Dorman
Brand #: 425-465

How-to Video:

(10:51 min)