Lexus CT200h Toyota Prius Wheel Bearing & Hub Assembly TRQ BHA54122 - 1ASHF00475

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing


  • Brand New Wheel Bearing & Hub Assembly
  • Fits LH (Driver Side) or RH (Passenger Side) Front
  • 4 Bolt Flange
  • Fits 5 Lug Wheel
  • Direct replacement
  • Built to strict quality control standards

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA54122 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (0:21)
    • Pry the wheel cover off with a small pry bar
    • Unstake the axle nut with a punch and hammer
    • Loosen the axle nut with a 30mm 12-point socket and a large breaker bar
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads and Rotor (2:28)
    • Remove the 12mm bolt from the brake line bracket
    • Pry the ABS wire out of the knuckle with a trim tool
    • Loosen the bottom strut bolts with a 22mm socket and 22mm wrench
    • Remove the 12mm bolt from the brake line
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove the 14mm slide pin bolts from the brake caliper
    • Pull the caliper aside
    • Remove the brake pads
    • Remove the 17mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the Phillips screw from the rotor
    • Pull the rotor off
  3. step : Remove the Front Wheel Bearing Hub Assembly (5:54)
    • Loosen three 14mm hub bolts from behind the hub
    • Remove the lower strut bolts
    • Separate the knuckle from the strut
    • Remove the axle nut
    • Tap the axle out with a dead blow hammer
    • Loosen the last 14mm bolt
    • Tap the bolts out with a hammer
    • Remove the 12mm bolt from the ABS sensor
    • Remove the magnet from the hub
    • Remove the wheel hub
  4. step : Installing the Front Wheel Bearing Hub Assembly (16:30)
    • Apply white grease to the knuckle
    • Insert the dust shield into place
    • Insert the wheel hub to the knuckle
    • Press the axle into the knuckle
    • Tighten the 14mm bolts to the knuckle
    • Torque the bolts to 30 foot-pounds
    • Insert the bolts to the bottom of the strut by hand
    • Place the axle nut to the CV axle
    • Insert the abs sensor/magnet into place
    • Tighten the 12mm bolt to the sensor gently
  5. step : Installing the Brakes (21:18)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the caliper bracket back into place
    • Tighten the 17mm bolts by hand
    • Tighten the bolts to 101 foot-pounds of torque
    • Apply grease to the brake pad tabs
    • Install the brake pads into the bracket
    • Tighten the 12mm brake hose bolt to the knuckle
    • Remove the lug nut from the rotor
    • Tighten the 12mm bolt to the brake line bracket
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to 25 foot-pounds
    • Tighten the lower strut bolts with a 22mm socket, ratchet, and 22mm wrench
    • Torque the lower strut bolts to 177 foot-pounds
    • Tighten the axle nut
  6. step : Reattaching the Wheel (24:31)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
    • Torque the hub nut to 159 foot-pounds
    • Press the wheel cover on

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Pick
  • Center Punch
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner
  • Bungee Cord
  • White Grease

  • Ratchets & Related

  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 14mm Socket
  • 17mm Socket
  • 21mm Socket
  • 10mm Socket
  • 30mm 12-Point Socket
  • 22mm Socket

  • Specialty Tools

  • Trim Tool Set
  • Dead Blow Hammer

  • Wrenches - Metric

  • 22mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2011-2017Lexus CT200h Lexus CT200h Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2010-2015Toyota Prius Toyota Prius Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
Part #: 1ASHF00475

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: BHA54122

How-to Video:

(25:59 min)