Jeep Liberty Wrangler Heater Blower Motor with Fan Cage - 1AHCX00211

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This Jeep Liberty & Wrangler heater blower motor with fan cage is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! This assembly has the following


  • New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Replaces dealer part numbers: 5066553AA, 5139720AA
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Blower Motor (0:32)
    • Remove the two Phillips screws from the panel underneath the glove box
    • Push the tab and disconnect the resistor harnesses with a flat blade screwdriver
    • Push the tab on the blower motor down
    • Remove the blower motor cover down and out
    • Pull the blower motor down and out
  2. step : Installing the New Blower Motor (1:09)
    • Insert the blower motor into its slot
    • Align the tab and turn the blower motor clockwise
    • Reconnect the resistor harnesses
    • Replace the two Phillips screws into the blower motor panel

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

4.50/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
It was awesome and easy to install After watching your video installation
February 15, 2017
The blower motor fan works great. Fast delivery company very easy to work with very knowledgeable and friendly
November 9, 2017
blowe motor for ac
Great fit and works perfectly! Would buy from A1 again
October 6, 2018
This is a good product. Prompt service and delivery. Perfect fit for my 2003 jeep wrangler. Great source for parts.
October 25, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
what connector do you need for blower?
Hank L September 19, 2018
I have a 2002 Liberty and I didnt need any additional conectors. You just plug the one on the blow into the one connected to the car.
David J September 19, 2018
The connector on the blower motor is already attached to this unit and would plug into the existing wiring harness on the vehicle. We do not sell or have details regarding just the connector alone. Thank you and have a great day!
Jessica D September 19, 2018
My connector burned up on blower motor do you stock replacement?
Hank L September 19, 2018
Thank you for your inquiry! We do carry a kit that includes a new resistor and harness, but it is currently out of stock. The part number is 1AESK00025.
Tim K September 19, 2018
Year Make Model Description
2002-2007Jeep Liberty Jeep Liberty Heater Blower Motor with Fan Cage
2002-2006Jeep Wrangler Jeep Wrangler Heater Blower Motor with Fan Cage
Part #: 1AHCX00211

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(02:01 min)